Month: September 2021

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 75903-58-1, name is 6-Aminopyridine-2-sulfonamide, the common compound, a new synthetic route is introduced below. COA of Formula: C5H7N3O2S

6-(3-fluoro-5-isobutoxy-phenyl)-2-(3,5,5-trimethylcyclopenten-1-yl)pyridine-3-carboxylic acid (74 mg, 0.19 mmol) and CDI (45 mg, 0.28 mmol) were mixed in DMF (740 muL) under and atmosphere of nitrogen and the reaction mixture was heated to 45 C. for 45 minutes. In a separate vial, 6-aminopyridine-2-sulfonamide (80.62 mg, 0.4655 mmol) and NaH (18 mg, 0.46 mmol) were mixed slowly in DMF (370.0 muL) and mixture was heated to 45 C. for 45 minutes. The 6-aminopyridine-2-sulfonamide reaction mixture was added to the activated acid and the reaction mixture was heated at 50 C. for 16 h. The reaction mixture was filtered and then purified directly by reverse-phase preparative chromatography utilizing a C18 column and HPLC-MS method 10-99% mobile phase B (mobile phase A=water (de-ionized, no acid modifier), mobile phase B=acetonitrile) to afford N-[(6-amino-2-pyridyl)sulfonyl]-6-(3-fluoro-5-isobutoxy-phenyl)-2-(3,5,5-trimethylcyclopenten-1-yl)pyridine-3-carboxamide (Compound 2081) (Compound 2039) (64 mg, 62%) as an off-white solid, ESI-MS m/z calc. 552.22064. found 553.4 (M+1)+. Retention time: 2.25 minutes; 1H NMR (400 MHz, DMSO) delta 12.55 (s, 1H), 7.96 (d, J=8.2 Hz, 1H), 7.86 (d, J=8.2 Hz, 1H), 7.68-7.60 (m, 1H), 7.56 (s, 1H), 7.49 (d, J=9.6 Hz, 1H), 7.20 (d, J=7.3 Hz, 1H), 7.01-6.84 (m, 1H), 6.72 (d, J=8.4 Hz, 1H), 6.55 (s, 2H), 5.62 (d, J=1.7 Hz, 1H), 3.85 (d, J=6.6 Hz, 2H), 2.66 (ddd, J=14.3, 7.4, 1.8 Hz, 1H), 2.03 (dd, J=13.2, 6.6 Hz, 1H), 1.95 (dd, J=12.1, 7.5 Hz, 1H), 1.38-1.28 (m, 4H), 1.25 (s, 3H), 0.99 (d, J=6.7 Hz, 6H), 0.93 (d, J=6.9 Hz, 3H).

The synthetic route of 75903-58-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; Miller, Mark Thomas; Anderson, Corey; Arumugam, Vijayalaksmi; Bear, Brian Richard; Binch, Hayley Marie; Clemens, Jeremy J.; Cleveland, Thomas; Conroy, Erica; Coon, Timothy Richard; Frieman, Bryan A.; Grootenhuis, Peter Diederik Jan; Gross, Raymond Stanley; Hadida-Ruah, Sara Sabina; Haripada, Khatuya; Joshi, Pramod Virupax; Krenitsky, Paul John; Lin, Chun-Chieh; Marelius, Gulin Erdgogan; Melillo, Vito; McCartney, Jason; Nicholls, Georgia McGaughey; Pierre, Fabrice Jean Denis; Silina, Alina; Termin, Andreas P.; Uy, Johnny; Zhou, Jinglan; (590 pag.)US2016/95858; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 870065-73-9, Adding some certain compound to certain chemical reactions, such as: 870065-73-9, name is 2,5,6-Trifluoronicotinonitrile,molecular formula is C6HF3N2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 870065-73-9.

A solution of 1.04 M KOtBu in t-BuOH (110 mL, 114 mmol) pre-mixed with THF (20 mL) was added dropwise over 15 min to a stirred 0 C. solution of 2,5,6-trifluoro-nicotinonitrile (16.0 g, 101 mmol) contaminated with an additional 4.6 g DMSO, as prepared in the preceding step, in t-BuOH (80 mL) and THF (15 mL; to prevent freezing). The resulting homogeneous reddish-amber solution was stirred for an additional 5 min at 0 C., the ice bath was then removed, and the solution stirred for an addititional 20 min at rt. The reaction was then quenched with 5 M NH4Cl (100 mL) and extracted with ether (2×100 mL). The combined organic layers were washed with water (1×100 mL), 1 M NaCl (1×150 mL), and 4 M NaCl (1×100 mL), and the clear purple organic layer was dried (Na2SO4), concentrated under reduced pressure, taken up in ether (50 mL), and filtered through a pad of diatomaceous earth. The filter cake was washed with ether (3×50 mL), and the combined filtrates were concentrated under reduced pressure at 50-60 C. to afford 20.89 g of a clear purple oil. NMR indicated an 89:11 mol ratio of the title compound and 2,6-di-tert-butoxy-5-fluoro-nicotinonitrile (18.22 g title compound; 85%). 1H-NMR (300 MHz, CDCl3) delta 7.60 (dd, 1H), 1.67 (s, 9H)

According to the analysis of related databases, 870065-73-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Kreutter, Kevin; Lu, Tianbao; Lee, Yu Kai; Teleha, Christopher; Player, Mark; Zhu, Xizhen; US2006/241148; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 932-35-4, Adding some certain compound to certain chemical reactions, such as: 932-35-4, name is 3-Hydroxypicolinonitrile,molecular formula is C6H4N2O, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 932-35-4.

In a round-bottom flask, mix 1.8 g (0.015 mol) of 3-hydroxypridine-2- carbonitrile, 30 ml of DMF, 9.77 g (0.30 mol) of Cs2CO3 and 2.54 g (0.018 mol) of 1-fluoro-4-nitrobenzene. Heat the reaction mass to 140 and stir at this temperature for 4 h; use the TLC method to ensure the completeness of the reaction. Distill off the solvent under redused pressure and add 40 mL of water. Filter the precipitate, wash with 15 ml of water and 15 ml of hexane. Yield: 2.86 g (79%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 932-35-4, 3-Hydroxypicolinonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JOINT STOCK COMPANY “BIOCAD”; GAVRILOV, Aleksey Sergeevich; ALESHUNIN, Pavel Aleksandrovich; GORBUNOVA, Svetlana Leonidovna; REKHARSKY, Mikhail Vladimirovich; KOZHEMYAKINA, Natalia Vladimirovna; KUKUSHKINA, Anna Aleksandrovna; KUSHAKOVA, Anna Sergeevna; MIKHAYLOV, Leonid Evgen`evich; MOLDAVSKY, Alexander; POPKOVA, Aleksandra Vladimirovna; SILONOV, Sergey Aleksandrovich; SMIRNOVA, Svetlana Sergeevna; IAKOVLEV, Pavel Andreevich; (197 pag.)WO2018/92047; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 918516-27-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 918516-27-5, name is 5-(4-Chlorophenyl)-1H-pyrrolo[2,3-b]pyridine, molecular formula is C13H9ClN2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

AICI3 (1.18 g, 8.87 mmol) was added to DCM (40 mL) and the mixture was stirred for 10 min at RT followed by cooling to 0C. 5-(4-chlorophenyl)-1 H-pyrrolo[2,3-b]pyridine (2) (1 eq., 405.92 mg, 1.77 mmol) was added and the mixture was stirred for 30 min then warmed to RT for 3 h. solution A was slowly added to the above suspension at 0 C and the reaction was stirred for 2 days at RT. After complete conversion, the reaction was quenched with methanol (MeOH, 10 mL) and concentrated to give a dark brown residue. Cold water (50 mL) was added to the residue and the pH of the solution was adjusted to 7 (neutral) with aq. ammonia. EtOAc (50 mL) was added and the mixture was stirred for 30 min. It was then filtered through celite, the filtrate was extracted with EtOAc (20 mL x 3) and the combined organic layers were washed with brine, dried over anhydrous Na2S04 and concentrated under reduced pressure to get crude N-(2,4-dibromo-3-(5-(4-chlorophenyl)-1 H-pyrrolo[2,3- b]pyridine-3-carbonyl)-phenyl)propane-1 -sulfonamide (900 mg, crude) which was used in the next step without further purification.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 918516-27-5, 5-(4-Chlorophenyl)-1H-pyrrolo[2,3-b]pyridine.

Reference:
Patent; HEPAREGENIX GMBH; ALBRECHT, Wolfgang; LAUFER, Stefan; SELIG, Roland; KLOeVEKORN, Phillip; PRAeFKE, Bent; (187 pag.)WO2020/16243; (2020); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 4487-57-4, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 4487-57-4, name is 2,4-Dibromo-5-nitropyridine. This compound has unique chemical properties. The synthetic route is as follows.

2-Bromo-5-nitropyridin-4-amine (Compound 63) To a solution of 2,4-dibromo-5-nitropyridine (200 mg, 0.709 mmol) and triethylamine (0.2 ml, 1.419 mmol) in THF 7 M ammonia (0.2 ml, 1.419 mmol) was added and stirred at room temperature for 24 h. Solvents were removed and the crude was purified by combiflash SiO2 chromatography (0-50% EtOAc-hexanes) to give 2-bromo-5-nitropyridin-4-amine (135 mg, 87%) as a tan solid. 1H-NMR (400 MHz, CD3OD) delta ppm 8.82 (s, 1H), 7.11 (s, 1H); m/z 219.69 (M+H)+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 4487-57-4, 2,4-Dibromo-5-nitropyridine.

Reference:
Patent; Stingray Therapeutics, Inc.; The University of Utah; Vankayalapati, Hariprasad; Liu, Xiaohui; Ramamoorthy, Gurusankar; Sharma, Sunil; Kaadige, Mohan Rao; Weston, Alexis; Thode, Trason; (59 pag.)US2019/31655; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 14432-12-3, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.14432-12-3, name is 4-Amino-2-chloropyridine, molecular formula is C5H5ClN2, molecular weight is 128.56, as common compound, the synthetic route is as follows.

A solution of 4-amino-2-chloropyridine (1.28 gm, 10 mmol) and di-tert-butyl dicarbonate (2.21 gm, 10.1 mmol) in THF (20 mL) was cooled to 00C and a solution of IM lithium bis(trimethylsilyl)amide in THF ( 20 mL, 20 mmol) was added slowly maintaining the temperature below 00C. The reaction was allowed to warm to room temperature over one hour and then quenched by the addition of 1.5 N aqueous ammonium chloride (15 mL). After stirring for several hours the reaction was extracted into ethyl acetate, washed with brine, the organic layer dried (Na2SO4), filtered and evaporated. The residue was triturated with diethyl ether give pure tert-butyl (2-chloropyridin-4- yl)carbamate. The mother liquors were chromatographed on silica gel eluting with 25 – 45% ethyl acetate/ hexane to afford more product. EPO A solution of tert-butyl (2-chloropyridin-4-yl)carbamate (1.14 gm, 5 mmol) in dry THF (20 mL) was cooled to -700C under an inert atmosphere and 1.7 M t-butyl lithium/pentane (8 mL, 13.5 mmol) was slowly added. The reaction was stirred for two hours and then dry DMF (1.2 mL, 15.5 mmol) was added. The reaction was allowed to slowly warm to room temperature over a three hour period. The reaction mixture was quenched with 3 N HCl (12 mL) and diluted with diethyl ether. The ether layer was washed with aqueous NaHCtheta3, dried (over Na2SO4), filtered and evaporated. The residue was triturated with cold diethyl ether to give pure t-butyl (2-chloro-3-formylrhoyridin-4- yl)carbamate. The mother liquors were chromatographed on silica gel eluting with 15-20% ethyl acetate/hexane to give additional product. 1H-NMR(5OO MHz, CDCI3): deltall.O (IH, br s), 10.52 (IH, s), 8.38 (IH, d, J= 6 Hz), 8.31 (IH, d, J= 6 Hz), 1.54 (9H, s); m/e (m+1): 257.2.

The chemical industry reduces the impact on the environment during synthesis 14432-12-3, I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK & CO., INC.; WO2006/135627; (2006); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 73870-24-3 ,Some common heterocyclic compound, 73870-24-3, molecular formula is C6H7Br2N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Cytosine-pyridine (2) was obtained by mixing cytosine (0.65 g,5.93 mmol, 3 eq) and KI (10 mg, catalytic amount) in 10 mL of dry DMF. After degassing the suspension with argon for 15 min, NaH(0.118 g, 4.9 mmol, 2.5 eq) was added and the mixture was stirredfor 30 min. A solution of 4-(bromomethyl)pyridine hydrobromide(0.5 g, 1.97 mmol, 1 eq) in 4 mL of dry DMF was slowly added to themixture. The mixture was stirred at 40C overnight and the reac-tion progress was followed by TLC. The crude was dried undervacuum and then washed with a minimum amount of water. Theproduct was puried by column chromatography (silica gel, MeOH:Et3N: DCM 1:0.2:20) affording compound 2 (120 mg, 30%) as awhite powder; dH (500 MHz, DMSO-d6) 4.87 (2H, s, Ha), 5.73 (1H, d,3J 7.2 Hz, Hb), 7.08 (1H, s, brd, NH), 7.17 (2H, d,3J 6.0 Hz, Hm),7.21 (1H, s, brd, NH), 7.69 (1H, d,3J 7.2 Hz, Hc), 8.50 (2H, d,3J 6.0 Hz, Ho); dC (126 MHz, DMSO-d6) 50.6 (Ca), 93.9 (Cb), 122.0(Cm), 146.1 (Cc), 147.0 (Cp), 149.7 (Co), 155.7 (Cd), 166.1 (Ce); HRMS(ESI): MH, found 203.0934. C10H10N4O requires 203.0927; IR(cm1): 3337.24, 3115.39, 1652.03, 1597.71, 1486.09, 1423.17,1384.39, 1369.72, 1278.91, 1208.06, 1130.29, 965.29, 815.97, 781.56,704.43, 682.80, 567.57, 521.43, 474.65, 405.44.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,73870-24-3, its application will become more common.

Reference:
Article; Bulach, Veronique; Hosseini, Mir Wais; Jouaiti, Abdelaziz; Kyritsakas, Nathalie; Tufenkjian, Elsa; Tetrahedron; vol. 76; 9; (2020);,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 13534-98-0, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 13534-98-0, name is 4-Amino-3-bromopyridine. A new synthetic method of this compound is introduced below.

General procedure: A mixture of amino pyridine 1 (1.0 mmol), 10%Pd/C (0.010 mmol), CuI (0.010 mmol), PPh3 (0.022 mmol) and Cs2CO3 (3 mmol) in PEG-400 (3 mL) was stirred for 15 min at room temperature under a nitrogen atmosphere. To this was added an appropriate iodoarene 2 (1.0 mmol) and the mixture was stirred further for 10 min. The mixture was then stirred at 95 – 100 C for 2.5 h under ultrasound irradiation using a laboratory ultrasonic bath Sonorex Super RK 510H model producing irradiation of 35 kHz. After cooling the mixture to room temperature an appropriate terminal alkyne 3 (1.2 mmol) was added to it. The mixture was then stirred again at 95-100 C for 4h under ultrasound irradiation. After completion of the reaction (indicated by TLC), the mixture was diluted with cold water (30 mL) and extracted with CH2Cl2 (3 x 10 mL). The organic layers were collected, combined, washed with cold water (2 x 15 mL), dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude product was then purified by column chromatography on silica gel using EtOAc / n-hexane as a solvent system.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,13534-98-0, 4-Amino-3-bromopyridine, and friends who are interested can also refer to it.

Reference:
Article; Dandela, Rambabu; Nath Singh, Shambhu; Pal, Manojit; Ramamohan, Hindupur; Siddaiah, Vidavalur; Venkateshwarlu, Rapolu; Tetrahedron Letters; (2019);,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 5470-17-7, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.5470-17-7, name is 3-Bromo-2-chloro-5-nitropyridine, molecular formula is C5H2BrClN2O2, molecular weight is 237.44, as common compound, the synthetic route is as follows.

Step 1: 3-bromo-2-(2-methoxyethoxy)-5-nitropyridine (Intermediate 15)To a stirred solution of S-bromo-l-chloro-S-nitropyridine (1.5 g, 6.32 mmol) and 2- methoxyethanol (0.961 g, 12.63 mmol) in DMF (10 mL) , potassium carbonate (1.746 g, 12.63 mmol) was added portion wise and the mixture was stirred at 60 0C for 5 hr. Reaction mixture was then cooled to RT, diluted with ethyl acetate (150ml), washed successively with water and then brine, organic layer was collected, dried over sodium sulfate and concentrated to give crude 3-bromo-2-(2-methoxyethoxy)-5-nitropyridine (1.500 g, 86 %) as brown solid. MS (ES+): 277.9 for C8H9BrN2O4

The chemical industry reduces the impact on the environment during synthesis 5470-17-7, I believe this compound will play a more active role in future production and life.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2009/147431; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 7598-35-8, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 7598-35-8, name is 2-Bromopyridin-4-amine. This compound has unique chemical properties. The synthetic route is as follows.

Et3N (0.64 ml_) and di-tert-butyl dicarbonate (4.62 mmol) at 0 C were added to a solution of commercially available 4-amino-2-bromopyirdine (2.31 mmol, 400 mg) in anhydrous THF (5.9 ml_), and the reaction mixture was stirred overnight at room temperature. The solvent was removed under reduced pressure; then the residue was diluted with EtOAc and sequentially washed with a saturated solution of sodium bicarbonate, water and brine. The organic phase was dried with Na2S04 and concentrated. The crude reaction product was purified by column chromatography over silica gel with a mixture of n- hexane/EtOAc 8:2 as the eluent to afford intermediate O (72% yield). [1H-NMR (CDCIs) d (ppm): 1.52 (s, 9H), 6.68 (bs, 1 H), 7.18 (dd, 1 H, J = 5.6, 2.0 Hz), 7.64 (d, 1 H, J = 1.9 Hz), 8.17 (d, 1 H, J = 5.7 Hz).]

According to the analysis of related databases, 7598-35-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; UNIVERSITA’ DI PISA; CALDERONE, Vincenzo; MINUTOLO, Filippo; TUCCINARDI, Tiziano; TESTAI, Lara; GRANCHI, Carlotta; MARTELLI, Alma; CITI, Valentina; DE LORENZO GARDINAL, Virginia; LENZI, Giulia; LEO, Francesca; MALLOGGI, Giulia; (0 pag.)WO2019/162911; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem