Month: April 2022

Synthetic Route of 6945-67-1, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 6945-67-1, name is 2-Bromo-4-nitropyridine. This compound has unique chemical properties. The synthetic route is as follows.

The crude title compound from Step A above was dissolved in a mixture of degassed 1 ,4- dioxane (8.6 mL) and water (2 mL) in a microwave vial. Then [1 , 1 – bis(diphenylphosphino)ferrocene]dichloro-palladium(ll), complex with dichloromethane (0.034 g, 0.04 mmol), 2-bromo-4-nitropyridine (0.1 g, 0.49 mmol) and cesium carbonate (0.266 g, 0.82 mmol) were added and the reaction mixture was heated at ~1 15C in a sand- bath for 6 hours. The reaction mixture was diluted with ethyl acetate (100 mL) and water (30 mL), the organic phase separated, dried over Na2S04, filtered and the solvents evaporated in vacuo. The dark residue was purified by chromatography on silica (25 g puriFlash, Interchim) using a Biotage Isolera system employing an ethyl acetate/n-heptane gradient (5/95 -> 100/0 -> 00/0) to afford a mixture of the title compound and byproducts (0.076 g). Step C (0310) The mixture of the title compound from Step B above and byproducts (0.076 g) was dissolved in dichloromethane (10 mL) and trifluoroacetic acid (2.4 mL) was added. The reaction mixture was stirred at room temperature for 6 hours and then methanol was added (10 mL). The solvents were evaporated in vacuo and the residue suspended in methanol (10 mL). The solvents were again evaporated in vacuo and the residue suspended in dichloromethane (4 mL). After the addition of triethylamine (2 mL, 14.4 mmol), di-terf-butyl dicarbonate (0.2 g, 0.86 mmol), and 4-(dimethylamino)-pyridine (0.0036 g, 0.028 mmol), the reaction mixture was stirred at room temperature for 18 hours. The reaction mixture was diluted with ethyl acetate (100 mL) and water (40 mL). The organic phase was separated, dried over Na2S04, filtered and the solvents removed in vacuo. The residue was purified on silica (25 g puriFlash, Interchim) using a Biotage I solera One purification system employing an ethyl acetate/n-heptane gradient (5/95 -> 100/0 -> 100/0) to afford the Comparative Example C9 (F-9) Precursor and the byproduct as -1 .1 -mixture (0.0231 g, pale yellow solid). 1H NMR (400 MHz, CDCI3) delta = 9.38 (d, 1 Eta), 9.35 (d, 1 H), 9,31 (s, 2H), 9.02 (d, 1 H), 8.76- 8.70 (m, 5H), 8.68 (d, 1 H), 8.55 (d, 1 H), 8.43-8.37 (m, 3H), 8.12 (dd, 1 H), 8.07 (dd, 1 H), 7.43 (d, 1 H), 7.41 (d, 1 H), 1.82 (s, 18H) (0311) MS (ESI): m/z = 291.94 [MH-Boc of the title compound]’, 170.04 [MH+-Boc of byproduct]*

According to the analysis of related databases, 6945-67-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; AC IMMUNE S.A.; PIRAMAL IMAGING SA; KROTH, Heiko; MOLETTE, Jerome; SCHIEFERSTEIN, Hanno; MUeLLER, Andre; SCHMITT-WILLICH, Heribert; BERNDT, Mathias; ODEN, Felix; (72 pag.)WO2018/15546; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 72587-18-9, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 72587-18-9, name is 2-Chloro-5-(trifluoromethyl)pyridin-3-amine. This compound has unique chemical properties. The synthetic route is as follows.

N-[2-Chloro-5-(trifluoromethyl)pyridin-3-yl]-3-(ethylsulphanyl)imidazo[1,2-a]pyridine-2-carboxamide (XXVI-1) 1.1 mg (9.37 mmol) of thionyl chloride were added dropwise to a solution of 298 mg (1.33 mmol) of 3-(ethylsulphanyl)imidazo[1,2-a]pyridine-2-carboxylic acid in 10 ml of acetonitrile, and the mixture was heated under reflux for 3 h. The solvent was removed under reduced pressure and the residue was twice co-evaporated with toluene. The residue was dissolved in 3 ml of N,N-dimethylformamide. Separately, 263 mg (1.33 mmol) of 2-chloro-5-(trifluoromethyl)pyridine-3-amine were added to a suspension at 0 C., of 107 mg (2.67 mmol) of sodium hydride in 7 ml of N,N-dimethylformamide, and the mixture was stirred for another 30 min. The acid chloride solution prepared beforehand was then slowly added dropwise at 0 C. The reaction mixture was stirred at room temperature for a further 2 h. The mixture was poured onto ice-water and extracted twice with ethyl acetate. The combined organic phases were dried over sodium sulphate and the solvent was then removed. The crude product was purified by HPLC using a water/acetonitrile gradient as mobile phase. (log P (neutral): 4.39; MH+: 401; 1H-NMR (400 MHz, D6-DMSO) delta ppm: 1.09 (t, 3H), 2.98 (q, 2H), 7.22-7.25 (m, 1H), 7.55-7.60 (m, 1H), 7.82 (d, 1H), 8.66 (d, 1H), 8.73 (d, 1H), 9.07 (d, 1H).

According to the analysis of related databases, 72587-18-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BAYER CROPSCIENCE AKTIENGESELLSCHAFT; FISCHER, Ruediger; WILCKE, David; HAGER, Dominik; ILG, Kerstin; EILMUS, Sascha; GOeRGENS, Ulrich; TURBERG, Andreas; (71 pag.)US2018/116222; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 55899-13-3, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 55899-13-3, name is 1-Amino-3-bromopyridin-1-ium 2,4,6-trimethylbenzenesulfonate. A new synthetic method of this compound is introduced below.

Methyl 6-[(6-bromo-2-phenylpyrazolo[1,5-a]pyridin-3-yl)carbonyl]pyridine-2-carboxylate After potassium carbonate (6.25 g) was added to an N,N-dimethylformamide (22.6 mL) solution of methyl 6-(1-oxo-3-phenyl-2-propyn-1-yl)pyridine-2-carboxylate (3.00 g) and 1-amino-3-bromopyridinium 2,4,6-trimethylbenzenesulfonate (7.71 g) at room temperature, the mixture was stirred at room temperature for 2 hours. The reaction solution was diluted with ethyl acetate, washed with water and saturated saline, and then dried over anhydrous sodium sulfate. The solvent was evaporated and then the residue thus obtained was purified by silica gel column chromatography (n-hexane:ethyl acetate = 3:1) to obtain a title compound as a yellow crystal (1.35 g). 1H-NMR (400 MHz, CDCl3) delta 3.85 (3H, s), 7.05 (2H, t, J = 7.9 Hz), 7.13 (1H, t, J = 7.9 Hz), 7.23 (2H, d, J = 7.9 Hz), 7.59 (1H, dd, J = 9.1 and 1.8 Hz), 7.86 (1H, t, J = 7.9 Hz), 7.94 (1H, d, J = 7.9 Hz), 8.00 (1H, dd, J = 7.9 and 1.2 Hz), 8.28 (1H, d, J = 9.1 Hz), 8.73 (1H, d, J =1.8 Hz).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,55899-13-3, 1-Amino-3-bromopyridin-1-ium 2,4,6-trimethylbenzenesulfonate, and friends who are interested can also refer to it.

Reference:
Patent; Kyorin Pharmaceutical Co., Ltd.; Kissei Pharmaceutical Co., Ltd.; SETO, Shigeki; UMEI, Kentaro; NISHIGAYA, Yosuke; TANIOKA, Asao; KONDO, Tatsuhiro; KONDO, Atsushi; TATANI, Kazuya; KAWAMURA, Naohiro; EP2669285; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 22280-60-0, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 22280-60-0, name is 6-Chloro-2-methyl-3-nitropyridine. This compound has unique chemical properties. The synthetic route is as follows.

6-methoxy-3-nitro-2-picoline 0.46 gm (20 mMol) sodium were dissolved in 15 mL anhydrous methanol. To this solution were added 2.3 gm 6-chloro-3-nitro-2-picoline in portions. The resulting mixture was stirred for 18 hours at room temperature and then 1 hour at reflux. The reaction mixture was poured into 100 mL of ice water with vigorous stirring. The suspension was filtered and the solid dried at 30C under reduced pressure for 18 hours to provide 2.04 gm (91%) of the desired compound as a tan solid.

According to the analysis of related databases, 22280-60-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ELI LILLY AND COMPANY; EP875513; (1998); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 185315-53-1 ,Some common heterocyclic compound, 185315-53-1, molecular formula is C6H5Cl2N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: A mixture of N-tert-butyl-7-(3,3-difluoropyrrolidin-l-yl)-3H-triazolo[4,5-d]pyrimidin-5- amine (25 mg, 0.08 mmol), NEt3 (14.6 mg, 0.144 mmol) and l-(bromomethyl)-2- (trifluoromethyl)benzene (26.8 mg, 0.112 mmol) in 2 mL DMF was stirred at room temperature for 5 h. The mixture was subjected to purification by preparative HPLC on reversed phase eluting with a gradient formed from acetonitrile, water and NEt . After evaporation of the product containing fractions 5.2 mg (14 %) of the title compound was isolated. MS(m/e): 456.4 (MH+). Example 24; N-tert-Butyl-3-[(3-chloropyridin-2-yl)methyl]-7-(3,3-difluoropyrrolidin-l-yl)triazolo [4,5-d]pyrimidin-5-amine; In analogy to the procedure described for the synthesis of N-tert-butyl-7-(3,3- difluoropyrrolidin- l-yl)-3-[[2- (trifluoromethyl)phenyl] methyl] triazolo [4, 5 -d] pyrimidin- 5 – amine (example 22) the title compound was prepared from N-tert-butyl-7-(3,3- difluoropyrrolidin-l-yl)-3H-triazolo[4,5-d]pyrimidin-5-amine and 3-chloro-2- (chloromethyl)pyridine. MS(m/e): 423.3 (MH+).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 185315-53-1, 3-Chloro-2-(chloromethyl)pyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; ROEVER, Stephan; ROGERS-EVANS, Mark; NETTEKOVEN, Matthias; SCHMITT, Sebastien; GRETHER, Uwe; KIMBARA, Atsushi; WO2015/32769; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 145255-19-2, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 145255-19-2, name is 5-Aminopyridine-2-carboxamide. A new synthetic method of this compound is introduced below.

To a flask charged with 5-aminopyridine-2-carboxamide (48 mg, 0.35 mmol) and DIEA (0.150 mL, 0.861 mmol) in dichloromethane (1 mL) was added a solution of 4-(difluoromethoxy)-2- fluoro-6-[2-(trideuteriomethoxy)-4-(trifluoromethoxy)phenoxy]benzoyl chloride ( 100 mg, 0.231 mmol) in dichloromethane ( 1.5 mL) at 0 C dropwise under an N2 atmosphere. The reaction mixture was stirred for 16 hours at room temperature then diluted with water and extracted with dichloromethane. The organic layer was dried over MgSO/t, filtered and concentrated in vacuo. Silica gel chromatography (0-60% ethyl acetate/hexanes) provided 5-[[4-(difluoromethoxy)-2-fluoro-6-[2-(trideuteriomethoxy)-4- (trifluoromethoxy)phenoxy]benzoyl]amino]pyridine-2-carboxamide (22 mg, 18%). ESI-MS m/z calc. 534.10, found 535.2 (M+l)+; retention time (Method B): 1.67 minutes (3 minute run). ‘H NMR (400 MHz, DMSO-d6) 5 11.18 (s, 1H), 8.85 (dd, J = 2.5, 0.7 Hz, 1H), 8.25 (dd, J = 8.6, 2.5 Hz, 1H), 8.08 – 7.97 (m, 2H), 7.60 – 6.93 (m, 6H), 6.37 (t, J = 1.7 Hz, 1H) ppm.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,145255-19-2, 5-Aminopyridine-2-carboxamide, and friends who are interested can also refer to it.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; AHMAD, Nadia; ANDERSON, Corey; ARUMUGAM, Vijayalaksmi; ASGIAN, Iuliana, Luci; CAMP, Joanne, Louise; FANNING, Lev Tyler, Dewey; HADIDA RUAH, Sara, Sabina; HURLEY, Dennis; SCHMIDT, Yvonne; SHAW, David; SHETH, Urvi, Jagdishbhai; THOMSON, Stephen, Andrew; (691 pag.)WO2019/14352; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 66909-38-4, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.66909-38-4, name is 6-Chloro-4-methylpyridin-3-amine, molecular formula is C6H7ClN2, molecular weight is 142.5862, as common compound, the synthetic route is as follows.

2-Chloro-4-methyl-5-nitropyridine (lg, 5.8 mmol) was dissolved in EtOH (60 mL). AcOH (4 mL) and Fe (5 eq. ) were added and the mixture was refluxed at 80C overnight. The mixture was filtered through celite and reduced under vacuum to afford the crude 5-amino-2-chloro-4-methylpyridine which was used in the next step with no further purification. The amine was dissolved in cone. HC1 (6 mL), transferred to a 3-neck round bottom flask, and cooled to-5 C. A solution of NaNO2/H2O (440 mgs/5 mL) was slowly added and the mixture was allowed to stir for 10 mins. To a second, separate 3-neck round bottom flask was added H20 (12 mL) and cooled to-5 C. Thionyl chloride (4.5 eq. ) was then added dropwise. After complete addition the mixture was allowed to warm to room temp. Whereupon CuCl (. 05 eq. ) was added and the mixture was then cooled back down to -5C. The first reaction mixture, containing the amine precursor, was slowly added to the second reaction mixture. A froth formed and was filtered off to afford 6-chloro-4-methyl-pyridine-3-sulfonyl chloride which was used in the next step with no further purification. The title compound was synthesized from 2- [2- (R, S)-3-oxo-1, 2,3, 4-tetrahydro-quinoxalin-2-yl]-N- (pyrid- 4-yl) ethyl acetamide and 6-chloro-4-methyl-pyridine-3-sulfonyl chloride using Method G. MS ni/z (M+H) 501.4 ; HPLC (CH3CN-H2O-0.1% TFA): Rt= 2.05 min.

Statistics shows that 66909-38-4 is playing an increasingly important role. we look forward to future research findings about 6-Chloro-4-methylpyridin-3-amine.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2003/93245; (2003); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 936011-17-5, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 936011-17-5, name is 5-Bromo-2-methoxyisonicotinaldehyde. This compound has unique chemical properties. The synthetic route is as follows.

To a solution of compound 39-1 (30 g, 139 mmol) and Et3N (27 g, 280 mmol) in 100 mL ofmethanol was added Pd(dppf)Ch (10.5 g, 139 mmol). The resulting mixture was stirred underCO (50 Psi) at 70 oc for 12 hours. After cooling, filtration and concentration, the resultingresidue was purified by column chromatography on silica gel (eluted with petroleum ether_ethylacetate= 3:1) to give 39-2. MS(ESI) m/e (M+H+): 196.0.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 936011-17-5, 5-Bromo-2-methoxyisonicotinaldehyde.

Reference:
Patent; MERCK SHARP & DOHME CORP.; HAGMANN, William K.; NARGUND, Ravi P.; BLIZZARD, Timothy A.; JOSIEN, Hubert; BIJU, Purakkattle; PLUMMER, Christopher W.; DANG, Qun; LI, Bing; LIN, Linus S.; CUI, Mingxiang; HU, Bin; HAO, Jinlai; CHEN, Zhengxia; WO2014/19186; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 204378-41-6, Methyl 6-chloro-4-methoxypicolinate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, category: pyridine-derivatives, blongs to pyridine-derivatives compound. category: pyridine-derivatives

(2) Synthesis of 6-chloro-4-methoxypicolinic Acid [Compound (II-75)] Using 6-chloro-4-methoxypicolinic acid methyl ester [Compound (V-75)] (0.5 g, 2.48 mmol), the Compound (II-75) was synthesised according to the process of Synthesis Example 20 (3). White solid, yield: 0.45 g, percent yield: 97.0percent, m.p.: 183-185° C. IR KBr cm-1: 1707, 1599, 1473, 1320, 1284, 1107, 1038, 921, 870, 723. 1H-NMR (60 MHz, d6-DMSO, delta): 3.84 (3H, s, OCH3), 6.94 (1H, d, J=2 Hz, pyridine ring H), 7.45 (1H, d, J=2 Hz, pyridine ring H), COOH indistinctness.

The synthetic route of 204378-41-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Kureha Kagaku Kogyo K.K.; US6610853; (2003); B1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 109613-97-0, 2-Bromo-4-methoxypyridin-3-amine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 109613-97-0, blongs to pyridine-derivatives compound. Quality Control of 2-Bromo-4-methoxypyridin-3-amine

To a solution of 2-bromo-4-methoxypyridin-3-amine (2.1 g, 10.34 mmol), N-(4-ethynylpyridin-2-yl)acetamide (1.82 g, 11.38 mmol) in DMF (15 mL) was added TEA (21.62 mL, 155 mmol) and CuI (0.12 g, 0.62 mmol). The reaction mixture was purged with nitrogen for 2 min, followed by addition of Pd(PPh3)2Cl2 (0.73 g, 1.03 mmol). The reaction mixture was then heated at 100 C. for 3 h. The reaction mixture was cooled down and diluted with ethyl acetate and saturated NaHCO3 solution. The organic layer (two times extracts) were combined, washed with saturated NaHCO3 solution, dried over MgSO4. The filtrate was concentrated in vacuo. The residue was purified by flash chromatography. The product was eluted with DCM to 50% of 10% MeOH in DCM to give the desired product as a light yellow (1.0 g, 34%); HPLC: RT=0.48 min (H2O/ACN with 0.05% TFA, Waters Acquity SDS C18, 2.1×50 mm, 1.7-mum particles, gradient=1.8 min, wavelength=220 nm); MS (ES): m/z=283.1 [M+H]+; 1H NMR (400 MHz, DMSO-d6) delta ppm 10.59 (s, 1H), 8.34 (dd, J=5.1, 0.7 Hz, 1H), 8.22 (s, 1H), 7.79 (d, J=5.3 Hz, 1H), 7.34 (dd, J=5.2, 1.4 Hz, 1H), 6.91 (d, J=5.3 Hz, 1H), 5.35 (s, 2H), 4.03 (q, J=7.2 Hz, 1H), 3.88 (s, 3H), 2.11 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,109613-97-0, its application will become more common.

Reference:
Patent; Bristol-Myers Squibb Company; Fink, Brian E.; Zhao, Yufen; Borzilleri, Robert M.; Zhang, Liping; Kim, Kyoung S.; Kamau, Muthoni G.; Tebben, Andrew J.; (162 pag.)US2016/176871; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem