Month: April 2022

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 120422-90-4, name is 4,6-Dichloro-3-methyl-1H-pyrazolo[4,3-c]pyridine, the common compound, a new synthetic route is introduced below. category: pyridine-derivatives

A mixture of Intermediate 4 (33 mg, 0.163 mmol) and cyclohexylamine (19 muIota, 0.163 mmol) in n-butanol (1 ml) was stirred at rt overnight, monitoring the reaction by LC/MS. The mixture was heated to 100C overnight and more cyclohexylamine (57 muIota, 0.499 mmol) was added and stirring was continued at 100C overnight. The mixture was then diluted with ethyl acetate and washed with water and brine. The organic phase was dried and concentrated. The residue was purified by flash column chromatography on silica gel eluting with 2:1 petrol-ethyl acetate to give an off-white coloured solid (10 mg, 23%). 1H NMR (400 MHz, DMSO-d6) delta ppm 1.13 – 1.25 (m, 1 H), 1.28 – 1.47 (m, 4 H), 1.58 – 1.66 (m, 1 H), 1.69 – 1.79 (m, 2 H), 1.90 – 1.97 (m, 2 H), 2.56 (s, 3 H), 3.91 – 4.01 (m, 1 H), 5.85 (d, J=7.8 Hz, 1 H), 6.56 (s, 1 H). m/z (ES+APCI)+ : 265/267 [M+H]+

The synthetic route of 120422-90-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MEDICAL RESEARCH COUNCIL TECHNOLOGY; CHAN, Brayn; ESTRADA, Anthony; SWEENEY, Zachary; MCIVER, Edward Giles; WO2011/141756; (2011); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 59290-81-2, Adding some certain compound to certain chemical reactions, such as: 59290-81-2, name is 2-Methyl-5-nitro-3-pyridinecarboxylic acid,molecular formula is C7H6N2O4, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 59290-81-2.

Compound D5 (208g, 1.15mol) was dissolved in t-butanol (2.1L), and thereto were added DPPA (37OmL) and TEA (223mL). The mixture was heated under reflux overnight, quenched by the addition of brine (10OmL). The resulting mixture was extracted by EA (1.0L) for three times. The combined organic phase was washed with brine (10OmL), dried over anhydrous MgSO4 and concentrated under vacuo. The residue was purified by column chromatography (EA : PE=I :2) to provide compound D6 (1 14.5g, 40% yield) as yellow solid. IH NMR (CDC13, 300MHz): delta=l .54 (s, 9H), 2.60 (s, 3H), 6.53 (s, IH), 8.98-8.99 (d, IH), 9.09-9.10 (d, IH). LC-MS [M+l] +: 252.0.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 59290-81-2, 2-Methyl-5-nitro-3-pyridinecarboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; XCOVERY, INC.; WO2008/88881; (2008); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 13958-93-5 ,Some common heterocyclic compound, 13958-93-5, molecular formula is C6H3Cl2NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Example 8 difluorocyclobutanecarboxamide.2HCI; 3,5-Dichloroiso?icotinic acid (84mg, 0.4mmol), the compound of Preparation 42 (150mg, 0.3mmol), 3- (diethoxyphosphoryloxy)-1 ,2,3-benzotriazin-4(3H)-one (132mg, 0.4mmol) and triethylamine (0.16mL, 1.2mmol) were dissolved in dichloromethane and stirred at room temperature for 24hours. The reaction was quenched by the addition of saturated sodium hydrogen carbonate solution and extracted using dichloromethane. The combined organic extracts were concentrated in vacuo to give the crude product. The crude mixture was purified by column chromatography on silica gel using dichloromethane-.methanol EPO (100:0 to 90:10) as eluent. The resulting product was then dissolved in dichloromethane (5mL) and treated with 2M hydrochloric acid in diethyl ether (5mL), the solvents were removed in vacuo to give 43mg of title compound as a white solid.1H NMR (400MHz CDCI3) delta 0.95 (3H, s), 1.20-1.85 (9H, m), 1.85-2.00 (1 H, m), 2.05-2.30 (2H, m), 2.45(1 H, bs), 2.70-3.10 (6H, m), 3.25-3.50 (2H, m), 4.05-4.20 (1H, m), 4.40-4.65 (2H, m), 7.10-7.40 (5H1 m),8.50 (2H, bs).LRMS: m/z APCI+579[MH+]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,13958-93-5, its application will become more common.

Reference:
Patent; PFIZER LIMITED; WO2006/77499; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 59942-87-9 ,Some common heterocyclic compound, 59942-87-9, molecular formula is C7H6N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Example 13: Synthesis of 4-(2-(pyrazolo[1 ,5-a]pyridin-2-yloxy)ethyl)morpholine To a solution of pyrazolo[1 ,5-a]pyridin-2-ol (120 mg, 0.89 mmol) in 4 ml_ of anhydrous DMF, were added K2C03 (270 mg, 1 .95 mmol), 4-(2-chloroethyl)morpholine hydrochloride (183 mg, 0.98 mmol) and Nal (134 mg, 0.89 mmol) and the mixture heated to 80 5C for 18 h under nitrogen. The solvent was evaporated under reduced pressure and the residue poured into a mixture of EtOAc and water, to afford after drying and evaporation of organic layers, 1 12 mg of an oil that was purified by silica gel flash chromatography with EtOAc/MeOH (9:1 ) as eluent to afford 57 mg of 4-(2- (pyrazolo[1 ,5-a]pyridin-2-yloxy)ethyl)morpholine. 40 mg (0.43 mmol) of anhydrous oxalic acid in 0.5 ml_ of acetone were added to a solution of 98 mg of 4-(2- (pyrazolo[1 ,5-a]pyridin-2-yloxy)ethyl)morpholine base oil in 0.5 ml_ of acetone. The solid is filtered and washed with diethyl ether to give 133 mg (90%). 1 H NMR (DMSO) delta ppm: 8.46 (d, J = 6.9 Hz, 1 H), 7.46 (d, J = 8.9 Hz, 1 H), 7.26 – 7.09 (m, 1 H), 6.74 (td, J = 6.9, 1 .4 Hz, 1 H), 6.00 (s, 1 H), 4.41 (t, J = 5.3 Hz, 2H), 3.74 – 3.60 (m, 4H), 3.07 (t, J = 5.2 Hz, 2H), 2.92 – 2.66 (m, 4H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,59942-87-9, its application will become more common.

Reference:
Patent; LABORATORIOS DEL DR. ESTEVE S.A.; DIAZ FERNANDEZ, Jose Luis; CUBERES ALTISENT, Mª Rosa; WO2013/124341; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1026796-81-5, name is N-(4-Bromopyridin-2-yl)acetamide, the common compound, a new synthetic route is introduced below. SDS of cas: 1026796-81-5

Step 2: N-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-yl]acetamide To a mixture of N-(4-bromopyridin-2-yl)acetamide (17.2 g, 80 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi-1,3,2-dioxaborolane (26.4 g, 104 mmol), Pd(dppf)Cl2 (11.7 g, 16 mmol) and KOAc (23.6 g, 240 mmol) under an atmosphere of nitrogen was added anhydrous DMF (1500 mL). The mixture was allowed to stir at 80 C. for 3.5 h. The solvent was removed and the residue was diluted with EtOAc (1000 mL). Activated carbon (100 g) was added. The slurry was heated at reflux for 5 min and then filtered. The organic solution was concentrated and the residue was recrystallized from EtOAc to give N-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-yl]acetamide (6.1 g, 29%) as a white solid. 1H NMR (400 MHz, DMSO-d6): delta 1.29 (s, 12H), 2.09 (s, 3H), 7.24 (dd, J=6.0, 1.2 Hz, 1H), 8.30-8.33 (m, 2H), 10.47 (br s, 1H).

The synthetic route of 1026796-81-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MILLENNIUM PHARMACEUTICALLS, INC.; BHARATHAN, INDU T.; BLACKBURN, Chris; CIAVARRI, Jeffrey P.; CHOUITAR, Jouhara; CILLIS, Courtney A.; D’AMORE, Natalie; FLE,OMG, Paul E.; GIGSTAD, Kenneth M.; GIPSON, Kirsta E.; GIRARD, Mario; HU, Yongbo; LEE, Janice; LI, Gang; REZAEI, Mansoureh; SINTCHAK, Michael D.; SOUCY, Francois; STROUD, Stephen g.; VOS, Tricia J.; XU, He; YE, Yingchun; (48 pag.)US2016/333007; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 134363-45-4, 2-(Pyridin-3-yl)benzoic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, HPLC of Formula: C12H9NO2, blongs to pyridine-derivatives compound. HPLC of Formula: C12H9NO2

To a solution of 4-(4-Amino-2-fluoro-phenyl)-piperazine-1 -carboxylic acid te/t-butyl ester (1.00 g, 3.4 mmol) and 2-pyhd-3-yl benzoic acid (0.70 g, 3.7 mmol) in DMF (10 ml_) was added HATU (1.42 g, 3.7 mmol) and diisopropylamine (0.65 ml_, 3.7 mmol). After stirring at room tempertaure for 18 h, the reaction mixture was diluted with EtOAc (100 ml_) and washed with H2O (4×50 ml_). The organic extracts were combined, dried (Na2SO4), and the solvent was evaporated under reduced pressure. Chromatography of the resulting residue (SiO2: EtOAc:Hex) yielded 4-[2-fluoro-4-(2-pyridin-3-yl- benzoylamino)-phenyl]-piperazine-1 -carboxylic acid te/t-butyl ester which was further dissolved in MeOH (20 ml_) and 4N HCI in dioxanes. After stirring for 5 h, the reaction mixture was concentrated down, neutralized with 1 N NaOH, and extracted with EtOAc (3x75ml_). The organic extracts were combined, dried (Na2SO4), and the solvent was evaporated under reduced pressure to yield the title compound.MS: mass calcd. for C22H21FN4O, 376.17; m/z found, 378.4 [M+H]+

The synthetic route of 134363-45-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA, N.V.; WO2009/6185; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 54718-39-7, name is 2,5,6-Trichloronicotinic acid, molecular formula is C6H2Cl3NO2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Product Details of 54718-39-7

Step 1: 2,5,6-trichloronicotinamide (Intermediate P) 1,1′-Carbonyldiimidazole (40 g, 247 mmol) was added in portions to 2,5,6-trichloronicotinic acid (50.7 g, 224 mmol, Combi-Blocks, San Diego, Calif., USA) in THF (400 mL), allowing gas evolution to cease between additions. The resulting mixture was stirred for 5 min and then was degassed with house vacuum and flushed with nitrogen (*2). The resulting mixture was heated to 50 C. for 60 min, then diluted with toluene (100 mL) and concentrated to half volume. The resulting mixture was cooled to 0 C. and ammonium hydroxide (60 mL, 437 mmol) was added slowly via syringe. The reaction was stirred for 10 min at room temperature, diluted with EtOAc (200 mL) and washed with water (3*100 mL). The organic layer was dried over anhydrous sodium sulfate and concentrated. The residue was suspended in 9:1 heptane/EtOAc (300 mL) and filtered. The filtered solids were collected and the remaining mother liquor was partially evaporated to half volume, cooled to 0 C., and filtered. The two crops of filtered solids were combined to provide 2,5,6-trichloronicotinamide.

With the rapid development of chemical substances, we look forward to future research findings about 54718-39-7.

Reference:
Patent; Amgen Inc.; LANMAN, Brian Alan; CHEN, Jian; REED, Anthony B.; CEE, Victor J.; LIU, Longbin; KOPECKY, David John; LOPEZ, Patricia; WURZ, Ryan Paul; NGUYEN, Thomas T.; BOOKER, Shon; NISHIMURA, Nobuko; SHIN, Youngsook; TAMAYO, Nuria A.; ALLEN, John Gordon; ALLEN, Jennifer Rebecca; (266 pag.)US2018/334454; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 55876-82-9, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 55876-82-9, name is Ethyl 5-methylpicolinate. A new synthetic method of this compound is introduced below.

To a solution of methyl 5-methylpyridine-2-carboxylate [Example 2, Step 1] (3 g, 18.3 mmol, 1.00 equiv) in ethanol (20 mL) and tetrahydrofuran (20 mL) was added CaCl2 (8.125 g, 549 mmol 4.00 equiv) and NaBH4 (1.38 g, 36.6 mmol, 2.00 equiv). The resulting solution was stirred overnight at 50 C. The solids were filtered out. The filtrate was concentrated under vacuum. The resulting solution was diluted with ethyl acetate (50 mL). The solids were filtered out. The filtrate was concentrated under vacuum to afford 2.6 g (88.9%) of (5-methylpyridin-2-yl)methanol as light yellow oil. LC-MS: m/z=124[M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,55876-82-9, Ethyl 5-methylpicolinate, and friends who are interested can also refer to it.

Reference:
Patent; Auspex Pharmaceuticals, Inc.; ZHANG, Chengzhi; (94 pag.)US2018/79742; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 1026796-81-5, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 1026796-81-5, name is N-(4-Bromopyridin-2-yl)acetamide. A new synthetic method of this compound is introduced below.

To a solution of N-(4-bromopyridin-2-yl) acetamide (250 mg, 1.16 mmol) and methyl iodide (0.094 mL, 1.51 mmol) in THF (4 mL) cooled to 0 C, sodium hydride (67 mg, 2.8 mmol) was added. The resulting mixture was stirred at room temperature overnight. The reaction mixture was quenched with water (5 mL) and ethyl acetate (5 mL). The solvents were removed by concentration under reduced pressure. The reaction mixture was diluted with water (20 mL) and extracted with ethyl acetate (3 x 20 mL). The combined ethyl acetate layers were dried over Na2S04, filtered and concentrated under reduced pressure to afford the title compound (284 mg, 1.24 mmol, 69% yield). LCMS (ESI) m/e 229.0 (Bromo pattern) [(M+H)+, calcd for C8Hi0BrN2O, 228.99]; LC/MS retention time (method F): tR = 1.50 min

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1026796-81-5, N-(4-Bromopyridin-2-yl)acetamide, and friends who are interested can also refer to it.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; DZIERBA, Carolyn Diane; BRONSON, Joanne J.; MACOR, John E.; DASGUPTA, Bireshwar; NARA, Susheel Jethanand; VRUDHULA, Vivekananda M.; PAN, Senliang; HARTZ, Richard A.; RAJAMANI, Ramkumar; (199 pag.)WO2016/22312; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 194673-12-6, Adding some certain compound to certain chemical reactions, such as: 194673-12-6, name is Ethyl 6-oxo-2-(trifluoromethyl)-1,4,5,6-tetrahydropyridine-3-carboxylate,molecular formula is C9H10F3NO3, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 194673-12-6.

A solution of ethyl 2-hydroxy-6-(trifluoromethyl)-3,4-dihydropyridine-5-carboxylate (14) (2.8 g, 11.8 mmol) and /V-bromosuccinimide (2.1 g, 11.8 mmol) in carbon tetrachloride (25 ml_) was heated at reflux overnight. The resulting precipitate was filtered off and the filtrate was concentrated under reduced pressure to afford a yellow solid that was purified by flash chromatography (silica gel 24 g, eluent gradient: from petrol: EtOAc 9:1 to 1 :1. The desired fractions were concentrated under reduced pressure and repurified by column chromatography (S1O2, 10 g, eluent petrol:EtOAC 9:1 to 1 :1). The desired fractions were concentrated under reduced pressure to afford the title compound as a white solid (890mg, 32%); 1H NMR (500 MHz, Chloroform-d) d 8.01 (d, J = 9.2 Hz, 1 H), 6.87 (d, J = 9.2 Hz, 1 H), 4.39 (q, J = 7.1 Hz, 2H), 1.39 (t, J = 7.1 Hz, 3H); LCMS (4 minute method) product at Rt = 0.44 min and ES+ m/z 236.09 [M+H]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 194673-12-6, Ethyl 6-oxo-2-(trifluoromethyl)-1,4,5,6-tetrahydropyridine-3-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THE UNIVERSITY OF SUSSEX; CARDIFF UNIVERSITY; UNIVERSITY COLLEGE CARDIFF CONSULTANTS LIMITED; WARD, Simon; BESWICK, Paul; PENNICOTT, Lewis; REUILLON, Tristan; CHUCKOWREE, Irina; VILLALONGA-BARBER, Carolina; PORTER, Roderick, Alan; (120 pag.)WO2019/166822; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem