Month: April 2022

Adding a certain compound to certain chemical reactions, such as: 1079179-12-6, 2-Chloro-3-fluoro-5-nitropyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, name: 2-Chloro-3-fluoro-5-nitropyridine, blongs to pyridine-derivatives compound. name: 2-Chloro-3-fluoro-5-nitropyridine

Step 2: To a stirred solution of 2-chloro-3-fluoro-5-nitropyridine (1.6 g, 9.0 mmol) in tetrahydrofuran (16 mL) was added tributylvinyltin (3.42 g, 10.8 mmol) and Pd2(dba)3 (0.42 g, 0.45 mmol), trifuryl phosphene (0.2 g, 0.9 mmol) under nitrogen atmosphere. The reaction mixture was deoxygenated thoroughly and was heated to 60 C. for 6 h. The reaction mixture was diluted with water (20 mL) and was extracted with ethyl acetate (3*25 mL). The combined organic layer was washed with brine (25 mL) and dried over anhydrous magnesium sulfate and concentrated under reduced pressure to afford the crude compound. The crude compound was purified by column chromatography (silica gel: 100-200 mesh; eluent: 5% ethyl acetate in hexane) to afford 3-fluoro-5-nitro-2-vinylpyridine. (1.5 g, 96%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1079179-12-6, 2-Chloro-3-fluoro-5-nitropyridine, and friends who are interested can also refer to it.

Reference:
Patent; Gruenenthal GmbH; FRANK, Robert; Christoph, Thomas; Lesch, Bernhard; Lee, Jeewoo; US2013/29961; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1060805-95-9, name is 4-Chloro-6-methylnicotinic acid, the common compound, a new synthetic route is introduced below. Formula: C7H6ClNO2

To a solution of 4-chloro-6-methylnicotinic acid(0.1 g, 0.58 mmol) in ethanol (10.0 mL) was added SOCl2 (0.25 mL,3.49 mmol) at 0 C and the reaction mixture was stirred at 85 C for 12 h. Thereaction mixture was concentrated and the crude product was dissolved in EtOAc,washed with water, brine, dried over anhydrous Na2SO4,filtered and concentrated. The crude residue was purified by Combiflashpurifier with 5% MeOH in DCM to afford the title compound as off-white solid(0.1 g, 82 %). 1H NMR (DMSO-d6,400 MHz) delta 1.26 (t, J = 6.8 Hz, 3H), 1.32 (t, J = 7.2 Hz, 3H), 2.44 (s, 3H), 4.12-4.17(m, 2H), 4.20-4.26 (m, 2H), 7.03 (s, 1H), 8.56 (s, 1H); MS (ESI) m/z 210.1 (M+H)+.

The synthetic route of 1060805-95-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ruf, Sven; Hallur, Mahanandeesha Siddappa; Anchan, Nisha K.; Swamy, Indu N.; Murugesan, Karthikai Raj; Sarkar, Sayantani; Narasimhulu, Lokesh Kananti; Putta, V.P. Rama Kishore; Shaik, Shama; Chandrasekar, Devaraj Venkatapura; Mane, Vishal Subhash; Kadnur, Sanjay Venkatachalapathi; Suresh, Juluri; Bhamidipati, Ravi Kanth; Singh, Manvi; Burri, Raghunadha Reddy; Kristam, Rajendra; Schreuder, Herman; Czech, Joerg; Rudolph, Christine; Marker, Alexander; Langer, Thomas; Mullangi, Ramesh; Yura, Takeshi; Gosu, Ramachandraiah; Kannt, Aimo; Dhakshinamoorthy, Saravanakumar; Rajagopal, Sridharan; Bioorganic and Medicinal Chemistry Letters; vol. 28; 5; (2018); p. 922 – 925;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 6945-67-1, Adding some certain compound to certain chemical reactions, such as: 6945-67-1, name is 2-Bromo-4-nitropyridine,molecular formula is C5H3BrN2O2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6945-67-1.

The crude title compound from Step A above was dissolved in a mixture of degassed 1,4- dioxane (8.6 mL) and water (2 mL) in a microwave vial. Then [1 ,1 – bis(diphenylphosphino)ferrocene]dichloro-palladium(ll), complex with dichloromethane (0.034 g, 0.04 mmol), 2-bromo-4-nitropyridine (0.1 g, 0.49 mmol) and cesium carbonate (0.266 g, 0.82 mmol) were added and the reaction mixture was heated at ~115C in a sand- bath for 6 hours. The reaction mixture was diluted with ethyl acetate (100 mL) and water (30 mL), the organic phase separated, dried over Na2S04, filtered and the solvents evaporated in vacuo. The dark residue was purified by chromatography on silica (25 g puriFlash, Interchim) using a Biotage Isolera system employing an ethyl acetate/n-heptane gradient (5/95 -> 100/0 -> 100/0) to afford a mixture of the title compound and byproducts (0.076 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 6945-67-1, 2-Bromo-4-nitropyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AC IMMUNE S.A.; PIRAMAL IMAGING SA; KROTH, Heiko; MOLETTE, Jerome; DARMENCY, Vincent; SCHIEFERSTEIN, Hanno; MUeLLER, Andre; SCHMITT-WILLICH, Heribert; BERNDT, Mathias; ODEN, Felix; GABELLIERI, Emanuele; (93 pag.)WO2018/15549; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 60781-83-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 60781-83-1, name is 4-Phenylpyridin-2-amine, molecular formula is C11H10N2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of (R)-4-BOC-2-morpholinecarboxylic acid (CAS Number 884512-77-0; 0.250 g, 1 .08 mmol) in DMF (15 ml) was added HATU (0.617g, 1 .62 mmol) at rt. The reaction mixture was stirred at rt for 30 min. 4-Phenylpyridin-2- ylamine (CAS Number 60781 -83-1 ; 0.184 g, 1 .08 mmol) and TEA (0.46 ml, 3.246 mmol) were added and the reaction mixture was stirred at rt for 72 h. The resulting reaction mixture was poured into water (25 ml) and extracted with EtOAc (3 x 25 ml). The combined organic layer was dried over Na2S04, filtered and concentrated under reduced pressure. The resulting residue was purified by flash chromatography (4% MeOH in DCM) yielding tert-butyl (R)-2-((4-phenylpyridin-2-yl)carbamoyl)morpholine- 4-carboxylate (0.1 15 g, 0.300 mmol). LCMS: Method C, 2.423, MS: ES+ 384.38; 1 H NMR (400 MHz, DMSO-d6) delta ppm: 9.86 (s, 1 H), 8.41 (d, J=5.2 Hz, 1 H), 8.36 (s, 1 H), 7.74 (d, J=6.8 Hz, 2 H), 7.48 – 7.57 (m, 4 H), 4.17 – 4.20 (m, 1 H), 4.01 – 4.03 (m, 2 H), 3.71 – 3.74 (m, 1 H), 3.53 – 3.58 (m, 1 H), 2.89 – 3.01 (m, 2 H), 1 .42 (s, 9 H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 60781-83-1, 4-Phenylpyridin-2-amine.

Reference:
Patent; MISSION THERAPEUTICS LIMITED; STOCKLEY, Martin Lee; KEMP, Mark Ian; MADIN, Andrew; (167 pag.)WO2018/65768; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 28733-43-9, name is 5-Bromonicotinamide. This compound has unique chemical properties. The synthetic route is as follows. Recommanded Product: 28733-43-9

EXAMPLE P; 3-Bromo-5-fluoropyridine; Step 1; 3-Amino-5-bromopyridine; To a ice-cold solution of 31.8 g (0.79 mol) of Sodium hydroxide and 40.7 g (0.255 mol) of Bromine in 340 ml of water were added 42.0 g (0.209 mol) of commercially available 5-Bromonicotinamide. The mixture was allowed to warm up to room temperature and then heated for 1 h at 70 C. The resulting brown suspension was allowed to cool to room temperature. The aqueous phase was saturated with brine and extracted three times with a 1:1 mixture of THF and t-Butyl-methyl ether. The combined organic phases were dried over magnesium sulfate, filtered and concentrated in vaccuo. Concentration in vaccuo yielded 39.1 g of a dark brown residue which was purified by flash chromatography (heptane/ethyl acetate 1:1) to yield the title compound as a brown solid (total 70.2 g, 70%)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 28733-43-9, 5-Bromonicotinamide.

Reference:
Patent; Buettelmann, Bernd; Ceccarelli, Simona Maria; Jaeschke, Georg; Kolczewski, Sabine; Porter, Richard Hugh Philip; Vieira, Eric; US2006/160857; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1352625-30-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1352625-30-9, name is 3-Bromo-6-fluoropyrazolo[1,5-a]pyridine, molecular formula is C7H4BrFN2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

c) 6-Fluoro-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyrazolo[1,5-a]pyridine A mixture of 3-bromo-6-fluoropyrazolo[1,5-a]pyridine (Preparation 103b, 0.300 g, 1.4 mmol), potassium acetate (0.492 g, 5.0 mmol) and bis(pinacolato)diboron (2.77 g, 10.9 mmol) in 1,4-dioxane (5 mL) contained in a Schlenck vessel was submitted to three vacuum-argon cycles and tetrakis(triphenylphosphine)palladium(0) (0.380 g, 0.33 mmol) was then added. The mixture was further submitted to three vacuum-argon cycles, sealed and then was stirred and heated to 100 C. After 20 hours, the reaction mixture was cooled, evaporated and then taken up in pentane and filtered through diatomaceous earth (Celite) and the filter cake was washed with a mixture of ethyl acetate/ether (3:2). The combined filtrate and washings were evaporated and the residue was purified by reverse phase chromatography (C-18 silica from Waters, water/acetonitrile/methanol as eluents [0.1% v/v formic acid buffered] 0% to 100%) to give the title compound (0.130 g, 36%) as a yellow solid. LRMS (m/z): 263 (M+1)+.1H NMR (300 MHz, CDCl3) delta ppm (two sets of peaks are seen in the NMR due to the presence of both the boronate and boronic acid): NMR of boronate: 1.21 (s, 12H), 7.56 (m, 1H), 8.02 (m, 1H), 8.36 (s, 1H), 9.16 (m, 1H).; PREPARATION 104 2-(6-Fluoropyrazolo[1,5-a]pyridin-3-yl)-9-(tetrahydro-2H-pyran-4-yl)-7-((2-(trimethylsilyl)ethoxy)methyl)-7H-purin-8(9H)-one A mixture of 2-chloro-9-(tetrahydro-2H-pyran-4-yl)-7-{[2-(trimethylsilyl)ethoxy]methyl}-7,9-dihydro-8H-purin-8-one (Preparation 3, 0.150 g, 0.39 mmol), 6-fluoro-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyrazolo[1,5-a]pyridine (Preparation 103, 0.183 g, 0.70 mmol) and potassium acetate (0.134 g, 1.37 mmol) in 1,4-dioxane (5 mL) and water (1.5 mL) contained in a Schlenck vessel was submitted to three vacuum-argon cycles and tetrakis(triphenylphosphine)palladium(0) (0.040 g, 0.03 mmol) was then added. The mixture was further submitted to three vacuum-argon cycles, sealed and then was stirred and heated under microwave irradiation (“Initiator sixty” from Biotage) at 120 C under an atmosphere of argon. After 40 minutes, further 2-chloro-9-(tetrahydro-2H-pyran-4-yl)-7-{[2-(trimethylsilyl)ethoxy]methyl}-7,9-dihydro-8H-purin-8-one (0.060 g, 0.16 mmol) and tetrakis(triphenylphosphine)palladium(0) (0.020 g, 0.017 mmol) were added and heating was continued for 90 minutes. The reaction mixture was evaporated and then was partitioned between ethyl acetate and water and the organic layer was dried (MgSO4) and concentrated. The residue was purified by flash chromatography (3:1 to 2:1 hexanes/ethyl acetate) to give the title compound (0.096 g, 50%) as pale yellow solid. LRMS (m/z): 485 (M+1)+.1H NMR (300 MHz, CDCl3) delta ppm 0.06 (s, 9H), 1.00 (t, 2H), 1.80 (m, 2H), 2.91 (dq, 2H), 3.49 (s, 2H), 3.68 (m, 2H), 4.22 (m, 2H), 4.63 (m, 1H), 5.25 (s, 2H), 7.38 (t, 1H), 8.40 (s, 1H), 8.52 (m, 1H), 8.65 (dd, 1H), 8.78 (s, 1H).

According to the analysis of related databases, 1352625-30-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ALMIRALL, S.A.; EASTWOOD, Paul Robert; GONZALEZ RODRIGUEZ, Jacob; GOMEZ CASTILLO, Elena; BACH TANA, Jordi; WO2011/157397; (2011); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 6515-09-9, Adding some certain compound to certain chemical reactions, such as: 6515-09-9, name is 2,3,6-Trichloropyridine,molecular formula is C5H2Cl3N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6515-09-9.

2,5,6-Trichloro-3-nitropyridine (Example 8) 3.6 g. (0.02 mol) of 2,5,6-trichloropyridine are dissolved in a mixture of 20 ml of 100% strength fuming nitric acid and 16 ml of concentrated sulphuric acid and are then heated at 100C in an oil bath for 12 hours. After cooling to approx. 20C, the reaction mixture is poured onto ice. The crude product is produced in the form of slightly yellowish crystals, which are filtered off with suction, washed with water and dried at 30C in vacuo over KOH. 3 g (66.7% of theory) of 2,5,6-trichloro-3-nitropyridine are obtained in the form of crystals which, after sublimation at 30 – 40C/12 mm Hg. melt at 68 – 70C. Analysis for C5 HCl3 N2 O2 (molecular weight 227.4): calculated C 26.41% H 0.44% Cl 46.77% N 12.32% found C 26.2% H 0.5% Cl 47.0% N 12.2%

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 6515-09-9, 2,3,6-Trichloropyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Ciba-Geigy Corporation; US3974166; (1976); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 1235036-15-3, name is tert-Butyl 3-bromo-6-chloropicolinate. A new synthetic method of this compound is introduced below., SDS of cas: 1235036-15-3

To a solution of tert-butyl 3-bromo-6-chloropicolinate (3.06 g) in tetrahydrofuran (50 mL) and water (20 mL) was added Example 1.14.1 (4.45 g), l,3,5,7-tetramethyl-8-tetradecyl-2,4,6-trioxa- 8-phosphaadamantane (0.732 g), Pd2(dba)3 (0.479 g), and K3P04 (11 g). The mixture was stirred at reflux overnight and concentrated. The residue was dissolved in ethyl acetate (500 mL) and washed with water and brine. The organic layer was dried over Na2S04, filtered, and concentrated. The residue was purified by flash chromatography, eluting with a gradient of 20-40% ethyl acetate in dichloromethane, to provide the title compound. MS (ESI) m/e 530.23 (M+H)+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 1235036-15-3, tert-Butyl 3-bromo-6-chloropicolinate.

Reference:
Patent; ABBVIE INC.; BENATUIL, Lorenzo; BRUNCKO, Milan; JUDD, Andrew, S.; LI, Yingchun; MCCLUSKEY, Andrew; PHILLIPS, Andrew, C.; PHILLIPS, Darren, C.; SEAGAL, Jane; SOUERS, Andrew, J.; (608 pag.)WO2017/214458; (2017); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 116308-38-4, 2-Formylisonicotinonitrile, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Application In Synthesis of 2-Formylisonicotinonitrile, blongs to pyridine-derivatives compound. Application In Synthesis of 2-Formylisonicotinonitrile

EXAMPLE 1 Preparation of 2-[N-methyl-N-(2-diphenylaminoethyl)amino]ethyl methyl 2,6-di-methyl-4-(4-cyano-2-pyridyl)-1,4-dihydropyridine-3,5-dicarboxylate and monofumarate thereof A 50-ml eggplant type flask was charged with 1.003 g (7.59 mmol) of 4-cyano-2-pyridinealdehyde, 2.691 g (7.59 mmol) of 2-[N-methyl-N-(2-diphenylaminoethyl)amino]ethyl acetoacetate and 901 mg (7.59 mmol) of methyl 3-aminocrotonate. After addition of isopropanol (10 ml), the contents were dissolved therein. The flask was equipped with a Dimroth condenser and the solution was heated at 40 to 45 C. for 39 hours with agitation. The reaction solvent was tilled off under reduced pressure and the residue (6.175 g) was fractionated by column chromatography on silica gel (elution solvent: ethyl acetate/methanol=99:1). The resulting crude product was recrystallized from isopropyl ether/methanol so as to obtain a pale yellow powder of the desired compound in an amount of 2.219 g (yield: 59%). m.p. (after crystallization from isopropanol ether/methanol): 155.5 to 157 C. Pertinent IR and NMR data are as follows and are provided for each of the compounds and acid addition salts described in the following Examples as well. STR6 The above-obtained compound (2.090 g, 3.69 mmol) was placed in a 300-ml eggplant type flask. After addition of ethanol (168 ml), the contents were dissolved therein. Thereafter, fumaric acid (429 mg, 3.69 mmol) was added and the flask was equipped with an air-cooling tube. After continued agitation at room temperature for 1.5 hours, the reaction solvent was distilled off under reduced pressure to obtain a slightly yellow powder of a fumarate of the desired compound in an amount of about 2.5 g. STR7

At the same time, in my other blogs, there are other synthetic methods of this type of compound,116308-38-4, 2-Formylisonicotinonitrile, and friends who are interested can also refer to it.

Reference:
Patent; Green Cross Corporation; US4910195; (1990); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 29681-42-3, name is Methyl 4-bromopicolinate. This compound has unique chemical properties. The synthetic route is as follows. Product Details of 29681-42-3

Example 17, Compound 17; (E)-(1 S,14R,15R,18S,21 S)-21 -(3-Hydroxy-benzyl)-18-isopropyl-14-methoxy-15-methyl-3-oxa-6,17,20,23,27-pentaaza-tricyclo[21.3.1.1 *5,9*]octacosa- 5 7,9(28),10-tetraene-2,16,19,22-tetraone; Com ound 17a: (4-Bromo-pyridin-2-yl)-methanol.; Sodium borohydride (763 mg, 20.17 mmol) was added portionwise to a solution of 4- bromo-pyridine-2-carboxylic acid methyl ester (1 .98 g, 9.166 mmol) in ethanol (50 mL) under nitrogen and the reaction mixture was stirred at room temperature for 18 hours. The reaction was quenched by the addition of acetone (10 mL) and the reaction was stirred for 15 minutes. The solvent was evaporated and the residue partitioned between water and ethyl acetate. The aqueous layer was extracted with ethyl acetate and the combined organics were collected, dried over anhydrous sodium sulfate and the solvent evaporated to afford the title compound (1 .61 g, 94%) as a yellow oil. H NMR (300 MHz, CDCI3) 3.4-3.5 {br s, 1 H), 4.80 (s, 2H), 7.40 (dd, J = 5.4, 1 .8 Hz, 1 H), 7.50 (br m, 1 H), 8.39 (d, J = 5.4 Hz, 1 H). LCMS (m/z) 188/200 [M+H], Tr = 1 .55 min.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 29681-42-3, Methyl 4-bromopicolinate.

Reference:
Patent; GILEAD SCIENCES, INC.; SELCIA LIMITED; APPLEBY, Todd; FLIRI, Hans, G.; KEATS, Andrew, J.; LAZARIDES, Linos; MACKMAN, Richard, L.; PETTIT, Simon, N.; POULLENNEC, Karine, G.; SANVOISIN, Jonathan; STEADMAN, Victoria, A.; WATT, Gregory, M.; WO2012/78915; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem