Category: pyridine-derivatives

Synthetic Route of 114042-02-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 114042-02-3, name is 5-Bromo-3-methyl-2-nitropyridine, molecular formula is C6H5BrN2O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(1) Add DMA and DMF to the reaction kettle,The molar ratio of DMA to DMF is 2:3.Stir and mix well,Thereafter, 2-nitro-3-methyl-5-bromopyridine is added thereto.Heat, keep the temperature at 160 C,Carry out a reflux reaction,After the reaction is completed,Distilling the solvent under reduced pressure,Add absolute ethanol,After mixing evenly, suction filtration, washing,Drying2-nitro-3-dimethylamine vinyl-5-bromopyridine

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 114042-02-3, 5-Bromo-3-methyl-2-nitropyridine.

Reference:
Patent; Jiaxing Xiuzhou Qu Hong Hezhen Middle School; Zhu Shengxiang; (6 pag.)CN109456323; (2019); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 2897-43-0, 2,6-Dichloro-3-nitropyridin-4-amine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Computed Properties of C5H3Cl2N3O2, blongs to pyridine-derivatives compound. Computed Properties of C5H3Cl2N3O2

(6) 2,4,6-trichloro-3-nitropyridine 2,6-dichloro-3-nitropyridine-4-amine (2.27 g, 10.9 mmol) was added to 48 mL concentrated hydrochloric acid, and cooled to 0-5 C. To the solution was added sodium nitrite (2.26 g, 32.7 mmol) in batches. After the addition of sodium nitrite, the reaction solution was stirred for 1 h at 0-5 C., and then stirred for 2 h at 25 C., adjusted to pH=7 with 40% sodium hydroxide solution, and extracted with ethyl ether. After the organic phase was dried (Na2SO4) and concentrated, it was subjected to column chromatography eluted with petroleum ether to afford 2 g white solid with a yield of 80.7%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,2897-43-0, 2,6-Dichloro-3-nitropyridin-4-amine, and friends who are interested can also refer to it.

Reference:
Patent; Xuanzhu Pharma Co., Ltd.; US2012/289497; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 885168-04-7, 5-Bromo-3-chloropicolinaldehyde, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, HPLC of Formula: C6H3BrClNO, blongs to pyridine-derivatives compound. HPLC of Formula: C6H3BrClNO

5-Bromo-3-chloropicolylaldehyde 2.06 gAnd 1.00 g of 1-butylamineIn 10 ml of toluene,While performing azeotropic dehydration using a Dean-Stark tube,It was heated to reflux for 2 hours.Then,The solvent was distilled off under reduced pressure,To the residue was added acetic acid 10 mlAnd 1.05 g of nitroethane were added,Followed by stirring at 100 C. for 40 minutes.After completion of the reaction,The reaction mixture was allowed to cool to room temperature, 30 ml of water was added, and the mixture was extracted with ethyl acetate (50 ml × 2).The organic layers were combined, dried over anhydrous sodium sulfate and then saturated brine, dried,The solvent was distilled off under reduced pressure,The residue was purified by silica gel column chromatography eluting with ethyl acetate-hexane (3: 97)0.76 g of the objective compound was obtained as brown crystals.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,885168-04-7, 5-Bromo-3-chloropicolinaldehyde, and friends who are interested can also refer to it.

Reference:
Patent; nissan chemical industries, Ltd.; Takeshi, Mita; Yuki, Tajima; Yusuke, Nanya; Kosay, Iwasa; Makoto, Inada; Miho, Asahi; (124 pag.)JP2017/39722; (2017); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 709652-82-4, 2-Amino-5-bromonicotinonitrile, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, name: 2-Amino-5-bromonicotinonitrile, blongs to pyridine-derivatives compound. name: 2-Amino-5-bromonicotinonitrile

A suspension of 2-amino-5-bromo-3-pyridinecarbonitrile (0.59 g, 3 mmol), DMF-DMA (1 ml, 7.5 mmol), and MeCN (2 ml) was irradiated at 50 C (input power of: 200 W) for2 min. The resulting mixture was cooled to room temperature and poured onto ice cold water. The precipitate was filtered off, washed with water, and dried to afford (1E)-N?-(3-cyano-2-pyridinyl)-N,N-dimethylmethanimidamide (Lacbay et al. 2014). Light yellow solid; yield 95%; m.p. 116-117 C; 1H NMR (400 MHz, DMSO-d6) delta 8.65-8.60 (m, 1H, H-5), 8.46 (d, J = 2.6 Hz, 1H, H-3), 8.32 (d,J = 2.6 Hz, 1H, N=CH), 3.16 (s, 3H, CH3),3.07 (s, 3H,CH3); 13C NMR (100 MHz, DMSO-d6) delta 162.27 (C-2),157.00 (C=N), 153.23 (C-6), 144.32 (C-4), 116.77 (CN), 110.23 (C-5), 102.68 (C-3), 35.00 (C-N); IR (film): 3457(C-N), 3061, 2916, 2795, 2483, 2306, 2214 (CN), 1960, 1625 (C=N), 1562, 1395 cm-1; HRMS (ESI) m/z: calculatedfor C9H10BrN4+ [M + H]+: 253.0089; found: 253.0084.

The synthetic route of 709652-82-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sun, Ya-Quan; Zong, Chao-Yang; Ji, Jin-Yu; Han, Qing; Chemical Papers; vol. 72; 12; (2018); p. 2965 – 2972;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.39903-01-0, name is 2-Amino-5-bromo-3-pyridinol, molecular formula is C5H5BrN2O, molecular weight is 189.01, as common compound, the synthetic route is as follows.COA of Formula: C5H5BrN2O

Preparation 56-Bromo-oxazolo[4,5-b]pyridine[00122] 2-Amino-5-bromo-3-hydroxypyridine (200 mg, 1.06 mmol) is dissolved in 3 ml of triethylortoformate and a catalytic amount of p-toluenesulfonic acid is added. The mixture is heated to reflux for 5 h, then cooled, diluted with DCM and washed with saturated sodium bicarbonate solution. The organic phase is dried over anhydrous sodium sulfate and evaporated to dryness. The residue is purified by flash column chromatography to afford 212 mg (60%) of the title compound.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,39903-01-0, 2-Amino-5-bromo-3-pyridinol, and friends who are interested can also refer to it.

Reference:
Patent; MERZ PHARMA GMBH & CO. KGAA; HENRICH, Markus; WEIL, Tanja; HECHENBERGER, Mirko; MUeLLER, Sibylle; KAUSS, Valerjans; ZEMRIBO, Ronalds; ERDMANE, Elina; SMITS, Gints; WO2011/15343; (2011); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 1235036-15-3, Adding some certain compound to certain chemical reactions, such as: 1235036-15-3, name is tert-Butyl 3-bromo-6-chloropicolinate,molecular formula is C10H11BrClNO2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1235036-15-3.

To Example 1.1.10 (100 mg) and tert-butyl3-bromo-6-chloropicolinate (52.5 mg) in dioxane(2 mL) was added tris(dibenzylideneacetone)dipalladium(O) (8.2 mg), K3P04 (114 mg), 1,3,5,7-tetramethyl-8-phenyl-2,4,6-trioxa-8-phosphaadamantane (5.24 mg) and water (0.8 mL). The mixturewas stirred at 95 oc for 4 hours, diluted with ethyl acetate and washed with water and brine. Theorganic layer was dried over Na2S04 , filtered, concentrated and purified by flash chromatography,eluting with 20% ethyl acetate in heptanes and then with 5% methanol in dichloromethane, to providethe title compound. MS (ESI) m/e 643.3 (M+Ht

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1235036-15-3, tert-Butyl 3-bromo-6-chloropicolinate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ABBVIE INC.; BOGHAERT, Erwin, R.; JUDD, Andrew, S.; PHILLIPS, Andrew, C.; SOUERS, Andrew, J.; BRUNCKO, Milan; (503 pag.)WO2017/214301; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 130473-27-7, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 130473-27-7, name is 1H-Pyrrolo[2,3-c]pyridine-5-carboxylic acid. A new synthetic method of this compound is introduced below.

Coupling: Example 24 is obtained as a white solid (40% yield) using acid C176 using Method C with non-critical changes. HRMS (FAB) calculated for C15H18N4O+H: 271.1559, found 271.1562 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,130473-27-7, 1H-Pyrrolo[2,3-c]pyridine-5-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; Wishka, Donn G.; Reitz, Steven Charles; Piotrowski, David W.; Groppi JR., Vincent E.; US2003/45540; (2003); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 66909-38-4, name is 6-Chloro-4-methylpyridin-3-amine. A new synthetic method of this compound is introduced below., Quality Control of 6-Chloro-4-methylpyridin-3-amine

Compound 6-chloro-4-methylpyridin-3-amine la (568 mg, 4.0 mmol), tert-butyl 3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-5,6-dihydropyridine-1(2H)-carboxylate (1.22 g, 4.0 mmol), cesium carbonate (3.8 g, 12 mmol), [1,1′-bis(diphenylphosphine)ferrocene]palladium dichloride dichloromethane adduct (146 mg, 0.2 mmol), 1,4-dioxane (30 mL), and water (7 mL) were mixed, degassed, and heated to reflux under nitrogen for 16 hrs. The mixture was cooled to room temperature and concentrated to remove solvent under reduced pressure. The residue was purified by column chromatography on silica gel (petroleum ether/ethyl acetate = 20/1 to 2/1) to produce the target compound tert-butyl 5-amino-4-methyl-5′,6′-dihydro-[2,3′-dipyridyl]-1′(2’H)-carboxylate 1b (401 mg, yellow oil), yield: 34%. MS m/z (ESI):290[M+1]

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 66909-38-4, 6-Chloro-4-methylpyridin-3-amine.

Reference:
Patent; Beijing InnoCare Pharma Tech Co., Ltd.; CHEN, Xiangyang; PANG, Yucheng; (44 pag.)EP3409672; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1026796-81-5, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1026796-81-5, name is N-(4-Bromopyridin-2-yl)acetamide, molecular formula is C7H7BrN2O, molecular weight is 215.05, as common compound, the synthetic route is as follows.

Intermediate 80: N-(4-(2-(Hydroxymethyl)-5-methyl-4-oxo-4,5-dihydrofuro[3,2-c]pyridin-7-yl)pyridin-2-yl)acetamide. 4,4,5,5-Tetramethyl-1 ,3,2-dioxaborolane (1 1.13 mL, 77 mmol) was added to a mixture of 7-bromo-2- (hydroxymethyl)-5-methylfuro[3,2-c]pyridin-4(5/-/)-one (for a preparation see Intermediate 78, 3.3 g, 12.79 mmol) and triethylamine (10.71 mL, 77 mmol) in 1 ,4-dioxane (20 mL) and the mixture was stirred for 5 min under nitrogen. Pd(PPh3)4 (1.478 g, 1 .279 mmol) was added and the mixture heated to 100C for 18 h. The mixture was cooled in an ice bath, then isopropanol (20.00 mL) was added, initially very cautiously, followed by water (10 mL), potassium carbonate (5.30 g, 38.4 mmol), PEPPSI-SIPr (0.871 g, 1.279 mmol) and A/-(4-bromopyridin-2-yl)acetamide (for a preparation see Intermediate 79, 3.02 g, 14.07 mmol). The mixture was heated to 80C for 2 h under nitrogen, then allowed to stand over the weekend. The mixture was diluted with ether (100 mL) and stirred for 10 min, then filtered and the solid was washed with water (50 mL) and dried under vacuum for 10 min to give the crude product. The resulting solid was heated in methanol (50 mL) to reflux, then cooled in an ice bath and the solid product collected by filtration to give A/-(4-(2-(hydroxymethyl)-5-methyl-4- oxo-4,5-dihydrofuro[3,2-c]pyridin-7-yl)pyridin-2-yl)acetamide (2.76 g, 8.81 mmol, 68.9 % yield) as a colourless solid. 1H NMR (400MHz, DMSO-of6) delta-ppm 10.53 (1 H, s), 8.50 (1 H, s), 8.38 (1 H, d), 8.13 (1 H, s), 7.48 (1 H, m), 6.85 (1 H, s), 5.46 (1 H, m), 4.55 (2H, d), 3.61 (3H, s), 2.13 (3H, s). LCMS (2 min, Formic): Rt = 0.55 min, MH+ 314.

Statistics shows that 1026796-81-5 is playing an increasingly important role. we look forward to future research findings about N-(4-Bromopyridin-2-yl)acetamide.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; AMANS, Dominique; BAMBOROUGH, Paul; BARKER, Michael David; BIT, Rino Antonio; BROWN, John Alexander; CAMPBELL, Matthew; GARTON, Neil Stuart; LINDON, Matthew J; SHIPLEY, Tracy Jane; THEODOULOU, Natalie Hope; WELLAWAY, Christopher Roland; WESTAWAY, Susan Marie; WO2014/140077; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 58539-65-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 58539-65-4, name is 2-Methylnicotinamide. A new synthetic method of this compound is introduced below.

Step 2 Preparation of 3-cyano-2-methylpyridine: To a suspension of 2-methylnicotinamide from step 1 (11.1 g, 0.081 mol) in triethylamine (24.8 g, 0.243 mol) and 400 mL of methylene chloride was added trifluoroacetic anhydride (21.0 g, 0.100 mol) rapidly at 0 C. The reaction was complete after a few minutes at this temperature. Water was added and the aqueous layer was extracted with methylene chloride. The combined organic layers were washed with water, brine and dried over magnesium sulfate. After filtration, the filtrate was concentrated and the residue was purified by chromatography on silica gel (ethyl acetate/hexane, 1:1) to give 7.2 g of 3-cyano-2methylpyridine as a pale yellow solid (75%): mp(DSC) 56-58 C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,58539-65-4, 2-Methylnicotinamide, and friends who are interested can also refer to it.

Reference:
Patent; GD Searle & Co; US5616601; (1997); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem