Pyridine-derivatives

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.72141-44-7, name is 4-Chloro-2-methoxypyridine, molecular formula is C6H6ClNO, molecular weight is 143.5709, as common compound, the synthetic route is as follows.Formula: C6H6ClNO

To a solution of LDA (1.0 M solution in hexane) (29.3 mL, 29.3 mmol) in THF (45 mL) was added a solution of 4-chloro-2-methoxypyridine (3.5 g, 24.38 mmol) in THF (8 mL) dropwise at -78 C. The reaction mixture turned into light yellow solution and was stirred at-78 C for 1 h, then DMF (3.78 mL, 48.8 mmol) was added dropwise. The reaction mixture was stirred at -78 C for lh. The reaction mixture was quenched with saturated NH4C1 solution at -78 C and the resulting mixture was stirred for 10 min and warmed up to rt. The resulting mixture was mixed with saturated NaHC03 solution and ethyl acetate. The organic layer was separated and washed with saturated NaHC03 solution, dried over MgS04. The filtrate was concentrated in vacuo. The residue was dissolved in DCM, purified via silica gel flash column chromatography, eluting with 0-25% ethyl acetate in hexane to give Intermediate 24A (white solid, 2.6 g, 15.15 mmol, 60% yield). LC-MS Anal. Calc’d for CvHeClNC 171.01, found [M+H] 172.1. Tr = 0.71 min (Method A). NMR (499MHz, chloroform-d) delta 10.47 (s, 1H), 8.20 (d, J=5.5 Hz, 1H), 7.01 (d, J=5.5 Hz, 1H), 4.08 (s, 3H)

At the same time, in my other blogs, there are other synthetic methods of this type of compound,72141-44-7, 4-Chloro-2-methoxypyridine, and friends who are interested can also refer to it.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; CHERNEY, Emily Charlotte; ZHANG, Liping; HUANG, Audris; SHAN, Weifang; WILLIAMS, David K.; ZHU, Xiao; GUO, Weiwei; (213 pag.)WO2018/209049; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 59020-10-9, name is 3-(Tributylstannyl)pyridine, the common compound, a new synthetic route is introduced below. category: pyridine-derivatives

A mixture of 8-bromo-3-(5-methyl-3-phenylisoxazol-4-yl)-5H-[1,2,4]triazolo[3,4-a]isoindole (100 mg) (as prepared in Example 4), 3-(tri-n-butylstannyl)pyridine (442 mg) and DMF (5 ml) was degassed with a stream of N2 for 0.5 h. Bis(triphenylphosphine)palladium(II) chloride (5 mg) was added and the reaction heated to 100 C. for 2 h. The mixture was concentrated under reduced pressure and the residue purified by column chromatography on silica, eluting with 2.5% MeOH/CH2Cl2 to give the title compound (75 mg, 64%). 1H NMR (400 MHz, CDCl3) ? 8.66 (1H, t, J=3.3 Hz), 8.23 (1H, d, J=1.4 Hz), 7.95-7.92 (1H, m), 7.63 (1H, dd, J=8.0, 1.7 Hz), 7.57-7.54 (2H, m), 7.49-7.38 (5H, m), 4.07 (2H, s), 3.97 (2H, s), 2.73 IS (3H, s), m/z (ES+) 392 (M+H)+.

The synthetic route of 59020-10-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boase, Amanda Louise; Ladduwahetty, Tamara; MacLeod, Angus Murray; Merchant, Kevin John; US2004/58970; (2004); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 59782-86-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 59782-86-4, name is 2-Chloro-5-iodonicotinic acid, molecular formula is C6H3ClINO2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of 4-fluorophenol (224 mg, 2.0 mmol) in DMF (5.0 mL) was added sodium hydride (48 mg, 2.0 mmol) at room temperature. After stirring for 10 min, methyl 2-chloro-5-iodonicotinate (J. Org. Chem. 1989, 54, 3618-3624, 594 mg, 2.0 mmol) was added to the reaction mixture. The reaction mixture was stirred under reflux for 16 h. Then the reaction mixture was poured into water (50 mL) and extracted with ether (50 mL x 3). The combined organic extracts were washed with brIne (50 m(at)-) and dr*(at)–d, (sod.uTY: s.1l(at)a(at)e). After removal o4 the 3ci’.3(at)f:(at) t’e (at)3(at):::(at)(at) <";zs ;'.(at)-Z?"(at)'(at)(at)3(at) hy7 '(at):(at):1B(at)(at) xt(at)l:r- :-;(at)(at)(at)(at)(at).(at)5..t:;,?"£;:(at).;/ 8(at)(at)(at)0E. £ ,q], L .-.."I.: -'-(at)2(at)::'(at)0/;:/::*-(at),(at)(at) ::_=J'(at)(at)'(at)(at)- (J.>,’. ] .:: ilf=No.= (at):<.No...---'(at) (I? lflXJ i:.: ..:.:,i .::":.1 compound: (at)H-NMR (CDCl3) No. 8.51 (1 H, d, J=2.3 Hz), 8.41 (1 H, s), 7.09 (4H, d, J=6.2 Hz), 3.95 (3H, s) ; MS (ESI) m/z 374 (M + H)+. While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 59782-86-4, 2-Chloro-5-iodonicotinic acid. Reference:
Patent; PFIZER PRODUCTS INC.; WO2005/102389; (2005); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1206981-49-8 ,Some common heterocyclic compound, 1206981-49-8, molecular formula is C6H5F3N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 3-(trifluoromethoxy)pyridin-2-amine (300 mg, 1.68 mmol) in dichloromethane (8 mL) was added N-bromosuccinimide (450 mg, 2.53 mmol) at 20 C. The reaction mixture was stirred at the same temperature for another 5 min and subsequently concentrated to dryness in vacuo. The resulting residue was purified by column chromatography (silica gel, 100-200 mesh, 15% ethyl acetate in petroleum ether) affording product (220 mg, 51%): 1H NMR (400 MHz, DMSO-d6) delta 8.03 (d, J=2.0 Hz, 1H), 7.75-7.74 (m, 1H), 6.68 (brs, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1206981-49-8, 3-(Trifluoromethoxy)pyridin-2-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GENENTECH, INC.; Siu, Michael; Estrada, Anthony; Liu, Wen; Lyssikatos, Joseph P.; Patel, Snahel; Liang, Guibai; Chen, Kevin; US2015/175619; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 61494-55-1, 2-(2-Chloropyridin-3-yl)acetic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Recommanded Product: 2-(2-Chloropyridin-3-yl)acetic acid, blongs to pyridine-derivatives compound. Recommanded Product: 2-(2-Chloropyridin-3-yl)acetic acid

[0540] To a stirred solution of diisopropyl amine (0.82 mL, 5.8 mmol) in anhydrous THF (5 mL) cooled to -15C was added n-butyl lithium (2.5 M in hexanes, 2.3 mL, 5.8 mmol) slowly, maintaining the temperature of the flask between -10C and 0C. The resultant mixture was stirred at room temperature for 15 minutes before being cooling to 0C. The LDA thus formed was added to a rapidly stirred suspension of 2-(2-chloropyridin-3-yl)acetic acid (500 mg, 2.9 mmol) in anhydrous THF (10 mL) at 0C. The resultant bright yellow suspension was stirred at 0C for 15 min. A solution of 2-fluoro-4-iodo-l -isothiocyanatobenzene (814 mg, 2.9 mmol) in anhydrous THF (10 mL) was then added to the reaction mixture (brown suspension) and heated to 65C for 18 hours. The reaction mixture was cooled and the volatiles removed in vacuo. The resultant crude product was redissolved in THF, cooled to 0C and 10% aqueous acetic acid in water (10 mL) was added slowly. Acetonitrile (5 mL) was added slowly until a brown solid developed, the solid was isolated by filtration and washed with ether and acetonitrile to give the title compound. LC/MS: [M+l]+ 415; NMR (300 MHz, DMSO-d6): d 10.74 (s, 1H), 9.21 (s, 1H), 8.36-8.25 (m, 2H), 7.79 (d, J = 1.8 Hz, 1H), 7.68-7.61 (m, 1H), 7.51 (t, J=8.5 Hz, 1H), 7.42- 7.31 (m, 1H).

The synthetic route of 61494-55-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NFLECTION THERAPEUTICS, INC.; TSAI, Kenneth, Y.; KINCAID, John; SARIN, Kavita, Yang; (319 pag.)WO2020/106303; (2020); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 55304-80-8, Adding some certain compound to certain chemical reactions, such as: 55304-80-8, name is 2,6-Dibromo-3-nitropyridine,molecular formula is C5H2Br2N2O2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 55304-80-8.

N, N-Dimethyl-N’- (6-bromo-3-nitropyridin-2-yl) sulfonic acid Stir a mixture of 2,6-dibromo-3-nitropyridine (11. 3g, 39.25 mmol) and N, N- dimethylsulfamide (0.006 g, 47.10 mmol) in DMF (40 mL). Add lithium hydride (0.81 g, 102.05 mmol) and stir at RT overnight. Add 100 mL of water and 3 N HC1 until pH = 7. Filter the yellow solid to provide the title compound (93%). 1H NMR (DMSO-d6) 8 10.25 (br s, 1H), 8.41 (d, J= 8.59 Hz, 1H), 7.50 (d, J= 8.59 Hz, 1H), 2.95 (2,6H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 55304-80-8, 2,6-Dibromo-3-nitropyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/75478; (2005); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 22918-01-0, Adding some certain compound to certain chemical reactions, such as: 22918-01-0, name is 2-Bromo-4-chloropyridine,molecular formula is C5H3BrClN, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22918-01-0.

To a solution of 2-bromo-4-chloropyridine (1.6 g, 8.0 mmol) in anhydrous tetrahydrofuran (40 mL) cooled at -70 C. was added the solution of lithium diisopropyl-amide (5.0 mL, 10.0 mmol, 2.0 M) over a period of 5 minutes and stirred at -70 C. for another 1 h. Anhydrous DMF (1.3 g) was introduced over a period of 3 minutes and the mixture was stirred for another 30 minutes. It was then quenched with saturated NH4Cl (30 mL) and extracted with ethyl acetate (20 mL*3). The combined organic layer was dried over anhydrous Mg2SO4, filtered, and evaporated under reduced pressure. The residue was purified by silica-gel column chromatography eluting with petroleum ether/ethyl acetate (20:1) to afford 114a as a yellow solid (900 mg, 48%). 1H NMR (500 MHz, DMSO) delta 10.21 (s, 1H), 8.52 (d, J=5.5 Hz, 1H), 7.79 (d, J=5.0 Hz, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 22918-01-0, 2-Bromo-4-chloropyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GENENTECH, INC.; Crawford, James John; Ortwine, Daniel Fred; Young, Wendy B.; US2013/116262; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 65515-39-1, 2-Methoxy-4,6-dimethylnicotinonitrile, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 65515-39-1, blongs to pyridine-derivatives compound. SDS of cas: 65515-39-1

Add a I M solution of DIBAL-H in toluene (240 mL, 240 mmol) to a solution of 2-methoxy-4,6-dimethyl-pyridine-3-carbonitrile (48 g, 295.95 mmol) in DCM (480 mL)at 0 C over 2 hr. Remove the ice bath after 1 hr and stir at RT overnight. Cool in a waterbath at RT and quench by slowly adding a mixture of lMaqueous HC1 (192 mL) andAcOH (192 mL). Add DCM, separate the layers, wash the organic phase with saturated aqueous NaC1, dry over Na2504, filter and concentrate in vacuo. Subject the resulting residue to chromatography on silica, eluting with a gradient of 0-20% EtOAc/hexane to afford title compound as a solid (22.6 g, 46% yield) after solvent evaporation. ES/MS(mlz): 166 (M+H). ?H NMR (400.1 MHz, CDC13) oe 2,43 (s, 3H), 2.54 (s, 3H), 4.01 (s,3H), 6.61 (s, 1H), 10.48 (s, 1H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,65515-39-1, its application will become more common.

Reference:
Patent; ELI LILLY AND COMPANY; DOMINGUEZ, Esteban; GUO, Deqi; MADER, Mary Margaret; NGUYEN, Anh-Quan Hannah; DEL PRADO, Miriam Filadelfa; RICHETT, Michael Enrico; RODRIGUEZ, Michael John; YIP, Yvonne Yee Mai; YU, Kuo-Long; (165 pag.)WO2017/35060; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 38923-08-9, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 38923-08-9, name is Ethyl 6-nitroimidazo[1,2-a]pyridine-2-carboxylate. A new synthetic method of this compound is introduced below.

A solution of 250mg (1.01 mmol) of ethyl 6-ni-troimidazo[ 1 ,2-a]pyridine-2-carboxylate in 20 ml of ethanolwas hydrogenated in the presence of 30 mg of palladium(10% on activated carbon) at RT and standard pressure for5 h. The reaction mixture was then filtered through Celiteand the residue was washed with ethanol. The combinedfiltrates were concentrated under reduced pressure and dried.Yield: 215 mg (quant.)10502] LC/MS [Method 5]: R=1.40 mm; MS (ESIpos):mlz=206 (M+H),10503] ?H-NMR (400 MHz, DMSO-d5): oe [ppm]=8.33 (s,1H), 7.66 (s, 1H), 7.37 (d, 1H), 6.94 (dd, 1H), 5.11 (s, 2H),4.26 (q, 2H), 1.29 (t, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,38923-08-9, Ethyl 6-nitroimidazo[1,2-a]pyridine-2-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; Bayer Pharma Aktiengesellschaft; ROeHRIG, Susanne; HILLISCH, Alexander; STRASSBURGER, Julia; HEITMEIER, Stefan; SCHMIDT, Martina Victoria; SCHLEMMER, Karl-Heinz; TERSTEEGEN, Adrian; BUCHMUeLLER, Anja; GERDES, Christoph; SCHAeFER, Martina; TELLER, Henrik; JIMENEZ NUNEZ, Eloisa; SCHIROK, Hartmut; KLAR, Juergen; (66 pag.)US2016/272637; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 866775-18-0, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 866775-18-0, name is Methyl 3-amino-6-bromo-5-(trifluoromethyl)picolinate. This compound has unique chemical properties. The synthetic route is as follows.

3-Amino-6-bromo-5-trifluoromethyl-pyridine-2-carboxylic acid methyl ester (1.40 g, 4.68 mmol) was suspended in MeOH (15 ml); Sodium hydroxide (2.0 M aqueous solution) (14.04 ml, 28.1 mmol) was added and the suspension was stirred at RT overnight. The reaction mixture was concentrated under reduced pressure and the resulting residue was dissolved in water (100 ml) and then acidifed by the addition of 5.0M HCI(aq). The product was extracted into ethyl acetate (2 x 75 ml) and the combined organic extracts were washed with water (50 ml), brine (25 ml), dried (MgS04) and concentrated under reduced pressure to afford the title product as a yellow solid. H-NMR: 9400MHz, DMSO-d6) ? 13.24 (1 H, br s, C02H), 7.74 (1 H, s, ArH), 7.17 92H, br s ArNH2). m/z 285.1 , 287.1 [M+H]+

According to the analysis of related databases, 866775-18-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NOVARTIS AG; LEGRAND, Darren, Mark; WO2013/38381; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem