Pyridine-derivatives

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 128071-77-2, name is 4-Bromo-2-fluoronicotinaldehyde, molecular formula is C6H3BrFNO, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Formula: C6H3BrFNO

A mixture of 4-bromo-2-fluoro- pyridine-3-carbaldehyde (2.04 g, 10.0 mmol, 1.0 eq.), methylhydrazine (1.05 mL, 20.0 mmol, 2.0 eq.) and DIEA (3.48 mL, 20.0 mmol, 2.0 eq.) in MeCN (50 mL, 0.2 M) was stirred at 50 C. After 1 h, the mixture was diluted with EtOAc and washed with water (2x). The aqueous layer was extracted with EtOAc (3x). The combined extracts were washed with brine, dried over Na2S04, filtered and concentrated in vacuo. Purification by flash chromatography on silica gel (0-60% EtOAc/hexanes) afforded the title compound as a white crystalline solid (1.73 g, 82%). XH NMR (400 MHz, CDCI3) delta 8.36 (d, J= 4.9 Hz, 1H), 8.04 (s, 1H), 7.33 (d, J = 4.9 Hz, 1H), 4.18 (s, 3H); ES-MS [M+l]+: 214.2.

With the rapid development of chemical substances, we look forward to future research findings about 128071-77-2.

Reference:
Patent; VANDERBILT UNIVERSITY; LINDSLEY, Craig W.; CONN, P., Jeffrey; BOLLINGER, Katrina A.; ENGERS, Darren W.; BLOBAUM, Anna L.; ENGERS, Julie L.; ROOK, Jerri M.; (96 pag.)WO2018/63552; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1124-29-4, 5-Acetylpyridin-2(1H)-one, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Computed Properties of C7H7NO2, blongs to pyridine-derivatives compound. Computed Properties of C7H7NO2

To a suspension of 5-acetylpyridin-2(lH)-one (500 mg, 3.6 mmol) in pyridine (4 mL) was added 0-(4-methoxybenzyl)hydroxylamine hydrochloride (761 mg, 4.0 mmol) and the reaction mixture was stirred at RT for 18 h. The mixture was then partitioned between CH2CI2 (10 mL) and 0 (10 mL), the organic layer was washed with 0 (2 x 10 mL), brine (2 x 10 mL), dried with Na2S04, filtered and concentrated under reduced pressure. The residue was triturated with toluene to give the title compound as a white solid (991 mg, 99%) MS (ES+) C15H16N2O3requires: 272, found: 273 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1124-29-4, 5-Acetylpyridin-2(1H)-one, and friends who are interested can also refer to it.

Reference:
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; MARSZALEK, Joe; LIU, Gang; KANG, Zhijun; CARROLL, Christopher, L.; MCAFOOS, Timothy; CZAKO, Barbara; WO2014/31928; (2014); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 15862-50-7, Adding some certain compound to certain chemical reactions, such as: 15862-50-7, name is 3-Bromo-2-methoxy-5-nitropyridine,molecular formula is C6H5BrN2O3, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 15862-50-7.

Step 1) A mixture of 3-bromo-2-methoxy-5-nitropyridine (Intermediate 51, 25 g, 107.3 mmol), tributyl(l-ethoxyvinyl)stannane (43.5 mL, 130.3 mmol) and tetrakis(triphenylphosphine)palladium(0) (8.68 g, 7.51 mmol) in anhydrous DMAC (100 mL) was purged with N2 for 30 min and then heated at 120C for 3 h. After cooling to rt the mixture was poured into 1M aqueous HC1 (500 mL). The mixture was stirred overnight before saturated aqueous potassium sodium tartrate solution (800 mL) was added and the mixture was extracted with EtOAc (2 x 300 mL). The combined organic phases were dried (MgS04), filtered and concentrated in vacuo. Purification by gradient flash column chromatography eluting with 0-30% EtOAc in z’sohexane yielded a yellow solid, which was slurried in diethyl ether and filtered to afford l-(2-methoxy-5-nitropyridin-3-yl)ethanone (3.38 g, 17.2 mmol) as white solid. LCMS (Method 3): m/z 197 (ES+), at 1.09 min. (0387) 1H NMR: (400 MHz, DMSO-i) delta: 2.62 (s, 3H), 4.13 (s, 3H), 8.66 (d, J=2.8, 1H), 9.24 (d, J=2.8, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 15862-50-7, 3-Bromo-2-methoxy-5-nitropyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; HEPTARES THERAPEUTICS LIMITED; CHRISTOPHER, John Andrew; BUCKNELL, Sarah Joanne; CONGREVE, Miles Stuart; TEHAN, Benjamin Gerald; NONOO, Rebecca Helen; BROWN, Giles Albert; SWAIN, Nigel Alan; MILLS, Mark; (111 pag.)WO2019/86902; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 23628-31-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 23628-31-1, name is 6-Aminopicolinic acid, molecular formula is C6H6N2O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1. Preparation of ethyl 6-aminopicolinate (78):To a solution of 2-amino-6-pyridinecarboxylic acid 77 (6.0 g, 43.5 mmol) in ethanol (150 mL) was added thionyl chloride (12.0 g, 101 mmol) at 0 0C. The resulting reaction mixture was stirred at reflux for 12 h. Upon cooling to room temperature, the reaction mixture was concentrated under reduced pressure. Saturated aqueous Na2CO3 solution was added until the pH of the solution reached 9. The mixture was concentrated under reduced pressure and dichloromethane (150 mL) was added to the resulting residue. The mixture was stirred vigorously at room temperature for 30 min and then filtered. The filtrate was concentrated under reduced pressure to afford 78 (5.5 g, 76 % yield).

According to the analysis of related databases, 23628-31-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SIRTRIS PHARMACEUTICALS, INC.; OALMANN, Christopher; PERNI, Robert, B.; VU, Chi, B.; WO2010/37127; (2010); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 94220-38-9, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.94220-38-9, name is 7-Chloro-5-methyl-1H-pyrazolo[4,3-b]-pyridine, molecular formula is C7H6ClN3, molecular weight is 167.5956, as common compound, the synthetic route is as follows.

EXAMPLE 6 7-[3-Dimethylaminopropylamino]-5-methyl-1H-pyrazolo[4,3-b]pyridine (E6) STR20 The title compound was prepared from 7-chloro-5-methyl-1H-pyrazolo[4,3-b]pyridine (D4) and 3-dimethylaminopropylamine by the method given in Example 2. On neutralization of the thus formed hydrochloride salt a clear solution was produced. After freeze drying, purification was carried out on Dowex 50W as described in Example 4, followed by crystallization from ethyl acetate to give the title compound as a white crystalline solid, m.p. 112-117. delta(DMSO-d6) 1.55-2.0 (2H,m), 2.23 (3H,s), 2.30-2.55 (2H,m), 3.1-3.5 (2H,m), 6.25 (1H,s), 6.72 (1H,br.t, J=4 Hz), 7.94 (1H,s).

The chemical industry reduces the impact on the environment during synthesis 94220-38-9, I believe this compound will play a more active role in future production and life.

Reference:
Patent; Beecham Group p.l.c.; US4670432; (1987); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 228410-90-0 ,Some common heterocyclic compound, 228410-90-0, molecular formula is C6H5BrN2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 5-bromo-4-methyl-3-nitropyridin-2-ol (24 g, 103 rnmol) in DMF (200 ml) was added K2CO3 (21.39 g, 155 mmol) and CH3I (21.86 g, 155 mmol). The reaction mixture was stirred at room temperature for 2h. The reaction mixture was poured into ice cold water, the solid formed was filtered and dried under vacuum to afford title compound as off white solid (23.5 g, 92 %). FontWeight=”Bold” FontSize=”10″ H NMR (400 MHz, DMSO-d6) delta 8.40 (s, 1H), 3.51 (s, 3H), 2.21 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,228410-90-0, its application will become more common.

Reference:
Patent; AURIGENE DISCOVERY TECHNOLOGIES LIMITED; BORUAH, Anima; CHITTY VENKATA, Srikanth; HOSAHALLI, Subramanya; PANIGRAHI, Sunil Kumar; WO2014/125408; (2014); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 211308-81-5, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 211308-81-5 as follows.

Preparation 5 : 5-Chloro-l/T-pyrrolo[2,3-b]pyridine-2-carboxylic acid; Pyruvic acid (0.43ml, 6.24mmol) was added to a solution of 5-chloro-3-iodopyridin-2-ylamine (Preparation 4, 500mg, 2.08mmol), palladium acetate (23mg, O.lOmmol) and DABCO (700mg, 6.24mmol) in anhydrous DMF (2OmL). The reaction mixture was degassed with argon for 20min, then heated to HO0C for 16h. The solvent was removed in vacuo and the residue suspended in water (1OmL) and acetic acid (5mL) and then filtered. The solid was dissolved in EtOAc (5OmL), extracted into 2N NaOH solution (5OmL) and the organic layer discarded. The aqueous solution was acidified with concentrated HCl and extracted into EtOAc (2x40mL). The combined organics were dried (MgSO4) and concentrated in vacuo to give the title compound as a beige solid. deltaH (CD3OD): 7.14 (IH, s), 8.14 (IH, d), 8.35 (IH, d).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,211308-81-5, its application will become more common.

Reference:
Patent; PROSIDION LIMITED; WO2006/59164; (2006); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 887707-23-5, name is 2-Hydroxy-5-iodo-3-(trifluoromethyl)pyridine. This compound has unique chemical properties. The synthetic route is as follows. HPLC of Formula: C6H3F3INO

A solution of 2-hydroxy-3-(trifluoromethyl)pyridine C in a mixture of N-iodosuccinimide (NIS), acetonitrile, and dimethylformamide (DMF) is heated at 80 C. for 2 hours to produce 2-hydroxy-3-trifluoromethyl-5-(iodo)pyridine I (greater than 80% yield). The 2-hydroxy-3-trifluoromethyl-5-(iodo)pyridine I is then mixed with POCl3 in DMF and heated to 130 C. in a microwave for 20 minutes to produce 2-chloro-3-trifluoromethyl-5-(iodo)pyridine J (yield of 50 to 55%). The 2-chloro-3-trifluoromethyl-5-(iodo)pyridine K is reacted in a solution of pMBnNH2, palladium(II) acetate, 2,2?-bis(diphenylphosphino)-1,1?-binaphthyl (BINAP), triethylamine, and cesium carbonate in toluene to produce 5-((4-methoxyphenyl))methylamino)-2-chloro-3-(trifluoromethyl)pyridine K (yield of 40%). The 5-((4-methoxyphenyl))methylamino)-2-chloro-3-(trifluoromethyl)pyridine K is reacted in a solution of zinc cyanide, tris(dibenzylideneacetone)dipalladium (Pd2(dba)3), and 1,1?-bis(diphenylphosphino)ferrocene (dppf) in DMF to provide 5-(4-methoxybenzylamine)-2-cyano-3-(trifluoromethyl)pyridine K (yield of 92%). The 5-(4-methoxybenzylamine)-2-cyano-3-(trifluoromethyl)pyridine K is reacted in a solution of dichloromethane and trifluoroacetic acid to provide 2-cyano-3-trifluoromethyl-5-(amino)pyridine H (yield greater than 95%). The 2-cyano-3-trifluoromethyl-5-(amino)pyridine H is reacted with thiophosgene in water at 25 C. for 2 hours to provide 5-isothiocyanato-3-(trifluoromethyl)pyridine-2-carbonitrile A (yield of 74% to 95%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 887707-23-5, 2-Hydroxy-5-iodo-3-(trifluoromethyl)pyridine.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; Jung, Michael E.; Sawyers, Charles L.; Ouk, Samedy; Tran, Chris; Wongvipat, John; (28 pag.)US9388159; (2016); B2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1235036-15-3 ,Some common heterocyclic compound, 1235036-15-3, molecular formula is C10H11BrClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To Example 1.1.10 (100 mg) and tert-butyl 3-bromo-6-chloropicolinate (52.5 mg) in dioxane (2 mL) was added tris(dibenzylideneacetone)dipalladium(0) (8.2 mg), K3P04 (114 mg), 1,3,5,7- tetramethyl-8-phenyl-2,4,6-trioxa-8-phosphaadamantane (5.24 mg) and water (0.8 mL). The mixture was stirred at 95 C for 4 hours, diluted with ethyl acetate and washed with water and brine. The organic layer was dried over Na2S04, filtered, concentrated and purified by flash chromatography, eluting with 20% ethyl acetate in heptanes and then with 5% methanol in dichloromethane, to provide the title compound. MS (ESI) m/e 643.3 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1235036-15-3, its application will become more common.

Reference:
Patent; ABBVIE INC.; BENATUIL, Lorenzo; BRUNCKO, Milan; JUDD, Andrew, S.; LI, Yingchun; MCCLUSKEY, Andrew; PHILLIPS, Andrew, C.; PHILLIPS, Darren, C.; SEAGAL, Jane; SOUERS, Andrew, J.; (608 pag.)WO2017/214458; (2017); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1092286-30-0, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1092286-30-0, name is 5-Chloro-2-methyl-3-pyridinecarboxylic acid. This compound has unique chemical properties. The synthetic route is as follows.

Step 1 : 5-Chloro-2-methylnicotinoyl chloride5-Chloro-2-methyl-nicotinic acid (4.15 g, 24.2 mmol) was placed in a flask with DCM (100 ml) and oxalyl chloride (3.68 g, 29 mmol). DMF (200 muIota) was added and the reaction mixture was stirred at RT for 1 hour (gas evolution). The mixture was filtered and the solvent was removed in vacuo to afford the title product which was used in the next step without further purification.

According to the analysis of related databases, 1092286-30-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ATKINSON Benjamin; BEATTIE David; CULSHAW Andrew James; DEVEREUX Nicholas James; MCKENNA Jeffrey; DALE James; WO2011/92293; A1; (2011);,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem