Pyridine-derivatives

Synthetic Route of 65550-78-9 ,Some common heterocyclic compound, 65550-78-9, molecular formula is C6H5BrIN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A. 5-Iodo-3-methyl-2-methoxy-pyridine. To a solution containing 2-bromo-5-iodo-3-methyl-pyridine (4.80 g, 16.0 mmol) in DMSO (15 ML) is added methanolic NaOMe (3.33 M, 5.3 ML, 17.7 mmol) at 0 C. The solution is allowed to warm to ambient temperature and then heated at 70 C. for 1 hour.The reaction mixture is diluted with diethyl ether (300 ML) and water (200 ML) and the layers are separated.The organic phase is washed with brine, dried over anhydrous Na2SO4, filtered and concentrated.The crude product is purified by silica gel flash column chromatography (hexane/diethyl ether, 19:1) to provide 2.86 g (71%) of the title compound as a white solid. 1H NMR (300 MHz, CDCl3) delta2.12 (s, 3H), 3.90 (s, 3H), 7.60 (d, J=2.1 Hz, 1H), 8.14 (d, J=2.1 Hz, 1H) ppm; MS (EI): m/z 249 (M+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,65550-78-9, its application will become more common.

Reference:
Patent; AVENTIS PHARMACEUTICALS INC.; US2004/102450; (2004); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1247503-48-5 , The common heterocyclic compound, 1247503-48-5, name is 6-(2,2,2-Trifluoroethoxy)picolinic acid, molecular formula is C8H6F3NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 6-(2,2,2-trifluoroethoxy)picolinic acid (2.2 g, 10 mmol, 1.0 equiv) in methanol (20 mL) were added 2 drops of H2SO4 (con.). The mixture was stirred at 20C for 20 hours, diluted with H2O (100 mL) and extracted with DCM (3*20 mL). The combined organic phase was dried over anhydrous sodium sulfite and concentrated in vacuo. The residue was purified by silica gel chromatography (PE/EA = 20/1) to afford the title compound methyl 6-(2,2,2-trifluoroethoxy)picolinate as a colorless oil (2.1 g, 88% yield). LC-MS: m/z 236.1 (M+H)+

The synthetic route of 1247503-48-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ANNAPURNA BIO, INC.; TANG, Haifeng; HANSON, Michael; BOYCE, Sarah; NIE, Zhe; (461 pag.)WO2020/73011; (2020); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 582303-10-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 582303-10-4, name is (2,6-Dimethylpyridin-3-yl)methanol. A new synthetic method of this compound is introduced below.

To a mixture of methyl ( 4-chloro-6-hydroxy-l- benzothiophen-3-yl) acetate (110 mg) and THF (dry) (5 mL) were added (2 , 6-dimethylpyridin-3-yl) methanol (58.8 mg) , tri-n- butylphosphine (0.159 mL) and ADDP (130 mg) at room temperature. The mixture was stirred at room temperature for 12 h. The insoluble material was removed by filtration and the filtrate was concentrated in vacuo. The residue was purified by silica gel column chromatography (EtOAc/hexane) to give the title compound (139 mg) . XH NMR (300 MHz, CDC13) delta 2.54 (3H, s) , 2.57 (3H, s) , 3.73 (3H, s), 4.11 (2H, s), 5.05 (2H, s) , 7.02 (1H, d, J = 7.9 Hz), 7.06- 7.09 (1H, m) , 7.13 (1H, s) , 7.29 (1H, s) , 7.58 (1H, d, J = 7.9 Hz) .

At the same time, in my other blogs, there are other synthetic methods of this type of compound,582303-10-4, (2,6-Dimethylpyridin-3-yl)methanol, and friends who are interested can also refer to it.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; TAKAKURA, Nobuyuki; BANNO, Yoshihiro; TERAO, Yoshito; OCHIDA, Atsuko; MORIMOTO, Sachie; KITAMURA, Shuji; TOMATA, Yoshihide; YASUMA, Tsuneo; IKOMA, Minoru; MASUDA, Kei; WO2013/125732; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1018505-59-3, 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, HPLC of Formula: C11H18N4, blongs to pyridine-derivatives compound. HPLC of Formula: C11H18N4

General procedure: Pd2(dba)3 (86.4mg, 0.09mmol) and Xant-phos (109.2mg, 0.19mmol) were added under N2 to a solution of 154 1E (290.0mg, 0.94mmol), INT-7 (228.6mg, 1.04mmol), and 152 potassium phosphate (400.5mg, 1.88mmol) in 111 1,4-dioxane (10mL). Then the mixture was reacted in the microwave at 150C for 1h. The mixture was cooled to RT, filtered, diluted with water (10mL), and extracted with DCM (10mL×3). The combined organic layers were washed with brine (30mL), dried over anhydrous Na2SO4, concentrated under a vacuum, and purified by preparative thin-layer chromatography to obtain 157 compound 1 (140.3mg; yield, 30%) as a yellow solid.

The synthetic route of 1018505-59-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Yin, Lei; Li, Heng; Liu, Wenjian; Yao, Zhenglin; Cheng, Zhenzhen; Zhang, Huabei; Zou, Hui; European Journal of Medicinal Chemistry; vol. 144; (2018); p. 1 – 28;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 136888-17-0 , The common heterocyclic compound, 136888-17-0, name is 5-Chloro-1H-pyrrolo[2,3-c]pyridin-2(3H)-one, molecular formula is C7H5ClN2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a degassed mixture of l,4-dioxane (20 mL) and water (3.0 mL) were added 5- chloro- 177-pyrrolo[2,3-c]pyridin-2(377)-onc (step 1 intermediate) (300 mg, 1.78 mmol) and (2-fluoro-6-methoxyphenyl)boronic acid (453 mg, 2.67 mmol) and the mixture was evacuated for 15 min. XPhos Pd G2 (140 mg, 0.18 mmol) and tribasic potassium phosphate (756 mg, 3.56 mmol) were added to the mixture. The resulting reaction mixture was heated on a pre-heated oil bath at 90 C for 2 h. The mixture was cooled to RT and concentrated under reduced pressure. The crude material was purified by silica gel column chromatography to yield 140 mg of the desired compound. 1 H NMR (400 MHz, DMSO-de) d 3.61 (s, 2H), 3.78 (s, 3H), 6.88 (t, J= 9.2 Hz, 1H), 6.96 (d, J = 8.4 Hz, 1H), 7.27 (s, 1H), 7.36-7.44 (m, 1H), 8.15 (s, 1H), 10.62 (s, 1H).

The synthetic route of 136888-17-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ICHNOS SCIENCES S.A.; CHAUDHARI, Sachin, Sundarlal; GHARAT, Laxmikant, Atmaram; IYER, Pravin; DHONE, Sachin, Vasantrao; ADIK, Bharat, Gangadhar; WADEKAR, Prashant, Dilip; GOWDA, Nagaraj; BAJPAI, Malini; (233 pag.)WO2020/70331; (2020); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 153034-88-9, name is 2-Chloro-4-iodo-3-methylpyridine, molecular formula is C6H5ClIN, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Product Details of 153034-88-9

General procedure: Table 2, example 4 PdOAc2 (3.4 mg, 0.015 mmol), cesium carbonate (293 mg, 0.900 mmol), and tris(4-methoxyphenyl)phosphine (12 mg, 0.033 mmol) were combined in dioxane (2 mL) and stirred for 15 min at room temperature under an atmosphere of nitrogen. Then 6-chloro-3-iodo-2-methylpyridine (76 mg, 0.30 mmol), O-benzoyl morpholine (69 mg, 0.330 mmol), methylboronic acid(20 mg, 0.33 mmol), and bicyclo[2.2.1]hept-2-ene (28 mg,0.30 mmol) were added as a solution in dioxane (2 mL) to the previously prepared solution of catalyst and base. The reaction was sealed and heated to 100C for 18 h. The reaction mixturewas cooled to room temperature and filtered through a pad of celite eluting with ethyl acetate. The eluent was concentrated and the residue was puried by silica gel chromatography (ISCO 24 gsilica cartridge; 0-30% ethyl acetate in hexanes) to provide4-(6-chloro-2,3-dimethylpyridin-4-yl)morpholine (41 mg, 60%yield) as a colorless oil

With the rapid development of chemical substances, we look forward to future research findings about 153034-88-9.

Reference:
Article; Wilson, Jonathan E.; Tetrahedron Letters; vol. 57; 46; (2016); p. 5053 – 5056;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 1122-43-6, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1122-43-6, name is 2,6-Dimethyl-3-hydroxypyridine. This compound has unique chemical properties. The synthetic route is as follows.

D. [5-(4-Fluorophenylcarbamoyl)pyrimidin-2-yloxy]acetic acid 2,6-dimethyl-pyridin-3-yl ester A mixture of [5-(4-fluorophenylcarbamoyl)pyrimidin-2-yloxy]acetic acid methyl ester (prepared above, 50 mg, 0.17 mmol), 2,6-dimethyl-pyridin-3-ol (21 mg, 0.17 mmol) and DMAP (41 mg, 0.34 mmol) were slurried in dichloromethane. The solution was treated with (3-dimethylamino-propyl)-ethyl-carbodiimide (EDC) (54 mg, 0.28 mmol). After 1 h, thin layer chromatography indicated complete conversion. The reaction mixture was quenched with 10 mL 1 M HCl(aq) and 30 mL dichloromethane. The phases were partitioned, and the aqueous phase extracted with 5 mL dichloromethane. The organic phases were combined and sequentially washed with 10 mL portions of 0.1 M HCl(aq), saturated. NaHCO3(aq) and brine. The organic layer was dried using Na2SO4, filtered and concentrated. The resulting 31 mg of off-white solid was chromatographed over SiO2 (5% methanol/dichloromethane) to yield 21 mg (31%) of the titled compound. ESI-MS z/z 397 (MH+), 395 (M-H-).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 1122-43-6, 2,6-Dimethyl-3-hydroxypyridine.

Reference:
Patent; UCB SA; US7176310; (2007); B1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 77199-09-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 77199-09-8, name is Ethyl 5-bromopicolinate, molecular formula is C8H8BrNO2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(b) Preparation of ethyl 5-ethoxypyridine-2-carboxylate 3 :To a solution of ethyl 5-bromopyridine-2-carboxylate 2 (1.5 g, 6.5 mmol) in 20 mL of EtOH was added a solution of sodium (0.18 g, 7.8 mmol) in 20 mL of EtOH. The mixture was stirred at reflux for 3 h. After removal of all solvent, the residue was purified by column (2: 1 of hexane/ethyl acetate) to give ethyl 5-ethoxypyridine-2-carboxylate 3 as an oil. Yield: 0.26 g, 20%. .HNMR (CDCI3) delta (ppm): 8.38 (d, 1 H), 8.10 (d, 1 H), 8.23 (d, 1 H), 7.22 (dd, 1 H), 4.45 (m, 2 H), 4.25 (m, 1 H), 1.40 (m, 6 H).

According to the analysis of related databases, 77199-09-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; OSLO UNIVERSITY HOSPITAL HF; HOLSWORTH, Daniel; WAALER, Jo; MACHON, Ondrej; KRAUSS, Stefan; VORONKOV, Andrey Edward; GOLDING, Louise; WO2012/76898; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 915006-52-9 ,Some common heterocyclic compound, 915006-52-9, molecular formula is C5H4BrIN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

15.5 g 6-Bromo-2-iodo-pyridin-3-ylamine, 5.9 ml ethyl acrylate, 2.72 g triphenylphosphine and 28.75 ml triethylamine were dissolved in 90 ml acetonitrile. An argon stream was bubbled through the reaction mixture for 10 minutes then 2.33 g palladium(ll)acetate were added and the reaction mixture stirred at 800C. The reaction mixture was filtered hot troupgh a pad of celite then the solvent was removed in vacuo.The residue was purified by chromatography on silica gel to obtain 10.2 g (E)-3-(3-Amino-6-bromo-pyridin-2-yl)-acrylic acid ethyl ester. C10H11BrN2O2 (271.12), MS(ESI+): 273.0, 271.0 (M+H+), Rf(ethyl acetate : n- heptane = 1 :2) = 0.12.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 915006-52-9, 6-Bromo-2-iodopyridin-3-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SANOFI-AVENTIS; WO2009/149820; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 77837-09-3, name is Methyl 6-oxo-1-phenyl-1,6-dihydropyridine-3-carboxylate. A new synthetic method of this compound is introduced below., HPLC of Formula: C13H11NO3

General procedure: Example 1-3 Synthesis of 6-oxo-1-phenyl-1,6-dihydro-3-pyridinecarboxylic acid [0042] After 750 mg (3.27 mmol) of methyl 6-oxo-1-phenyl-1,6-dihydro-3-pyridinecarboxylate was dissolved in 9 mL of methanol and 3 mL of water, 235 mg (9.81 mmol) of lithium hydroxide was added to the solution. Afterward, the resulting reaction solution was stirred at about 50° C. for about 5 hours. After termination of the reaction was determined by liquid chromatography, the solvent was removed in vacuo, followed by addition of aqueous HCl to titrate a pH of the reaction product to pH 2. After filtration of the resulting solid compound (Actual yield: 470 mg, Percent yield: 67percent), the resulting compound was used without purification. [0043] 1H-NMR (DMSO-d6,200 MHz) delta8.18 (s, 1H), 7.88 (d, 1H), 7.49 (m, 5H), 6.54 (d, 2H)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 77837-09-3, Methyl 6-oxo-1-phenyl-1,6-dihydropyridine-3-carboxylate.

Reference:
Patent; SK BIOPHARMACEUTICALS CO., LTD.; Maeng, Cheol Young; Jang, Young Koo; Cha, Su Bong; Shin, Hye Won; Joung, Chan Mi; Cha, Hwa Ryun; Yi, Eun Jung; US2013/317059; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem