Pyridine-derivatives

Application of 65515-39-1, Adding some certain compound to certain chemical reactions, such as: 65515-39-1, name is 2-Methoxy-4,6-dimethylnicotinonitrile,molecular formula is C9H10N2O, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 65515-39-1.

(a) 4-(3-hydroxypent-4-en-l-yl)-2-methoxy-6-methylnicotinonitrile and 4-(2- (hydroxymethyl)but-3-en- -yl)-2-methoxy-6-methylnicotinonitrile To a solution of 2-methoxy-4,6-dimethylnicotinonitrile (2.8 g, 17.26 mmol) in THF (85 mL) was added LHMDS (1 M in THF, 18.13 mL, 18.13 mmol) at 0 C dropwise via dropping funnel over 10 min, and the reaction mixture turned an orange color. The mixture was stirred at 0 C for 50 min, 2-vinyloxirane (1.703 mL, 20.72 mmol) was added dropwise via syringe and the mixture was stirred from 0 C to room temperature for 4 h. The reaction mixture was quenched with saturated aqueous ammonium chloride (40 mL) and the layers were separated, the aqueous layer was extracted with EtOAc (3x). The combined organics were concentrated and the residue was adsorbed onto silica, and purified by flash chromatography (CombiFlash, 0-40% EtOAc in hexane, 80 g column) to afford 4-(3-hydroxypent-4-en-l-yl)-2-methoxy-6-methylnicotinonitrile (512 mg, 2.204 mmol, 12.8% yield) as a yellow oil. LC-MS(ES) m/z = 233.3 [M+H]+. Also isolated was 4-(2-(hydroxymethyl)but-3-en-l-yl)-2-methoxy-6- methylnicotinonitrile (1.08 g, 4.65 mmol, 26.9% yield) as a yellow oil. LC-MS(ES) m/z = 233.3 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 65515-39-1, 2-Methoxy-4,6-dimethylnicotinonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; KNIGHT, Steven David; LAFRANCE, Louis Vincent III; MCNULTY, Kenneth C.; ROMERIL, Stuart Paul; SEEFELD, Mark Andrew; WO2014/195919; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1192813-41-4, 2-(Difluoromethoxy)-5-nitropyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Application In Synthesis of 2-(Difluoromethoxy)-5-nitropyridine, blongs to pyridine-derivatives compound. Application In Synthesis of 2-(Difluoromethoxy)-5-nitropyridine

2-Difluoromethoxy-5-nitro-pyridine obtained in Step A (1.6 g) was treated with iron (5 g) and concentrated hydrochloric acid (0.23 ml) in ethanol (15 ml) and water (2.5 ml) at 800C for 20 minutes. Filtration over Celite and evaporation of the solvent afforded 6- difluoromethoxy-pyridin-3-yl-amine (1.4 g) as an orange solid. IH NMR (400 MHz, CDCI3) 3.51 (br s, 2H), 6.89 (d, IH), 7.23 (d, IH), 7.44 (dd, IH), 7.80 (d, IH).

The synthetic route of 1192813-41-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; PITTERNA, Thomas; CASSAYRE, Jerome Yves; CORSI, Camilla; MAIENFISCH, Peter; WO2010/9968; (2010); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 33252-28-7, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 33252-28-7, name is 6-Chloronicotinonitrile. A new synthetic method of this compound is introduced below.

2-Chloro-5-cyanopyridine (1 .5 g) is dissolved in hydrazine (6 mL) at r.t. and an exothermic reaction occurs and a solid precipitate forms. Water is added and the solid is filtered off washing with water and is dried by suction to give the hydrazine intermediate

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33252-28-7, its application will become more common.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; NEUROCRINE BIOSCIENCES, INC.; HECKEL, Armin; HIMMELSBACH, Frank; LANGKOPF, Elke; NOSSE, Bernd; ASHWEEK, Neil, J.; HARRIOTT, Nicole; WO2012/168315; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 887707-23-5, name is 2-Hydroxy-5-iodo-3-(trifluoromethyl)pyridine. This compound has unique chemical properties. The synthetic route is as follows. HPLC of Formula: C6H3F3INO

A mixture of compound 2a2 (115.7 g, 400 mmol) and PhPOCI2 (668.6 g, 343 mmol) under N2 is stirrred at 136C overnight, then cooled to RT and added slowly to 3 L of crushed ice. The aqueous mixture is adjusted to pH 6 and filtered. The aqueous filtrate is extracted with DCM (3 L) then the organic phase is washed with saturated NaHCO3 and brine, dried over Na2SO4, filtered and concentrated to provide chloropyridine 2a3.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 887707-23-5, 2-Hydroxy-5-iodo-3-(trifluoromethyl)pyridine.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GmbH; WO2009/18656; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.96428-50-1, name is Ethyl 8-(benzyloxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylate, molecular formula is C18H18N2O3, molecular weight is 310.35, as common compound, the synthetic route is as follows.Product Details of 96428-50-1

Example 2A 8-(Benzyloxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylic acid 253 ml of 2N aqueous sodium hydroxide solution were added to a solution of 15.7 g (50.59 mmol) of ethyl 8-(benzyloxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylate in 253 ml of dioxane, and the mixture was stirred at room temperature for 14 hours. 101 ml of 6N hydrochloric acid were then added to the mixture. The solid formed was filtered off, washed with water and with methyl tert-butyl ether and then dried in a vacuum drying cabinet at 40 C. overnight. This gave 15.49 g (108% of theory) of 8-(benzyloxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylic acid as a colourless solid. The yield was more than 100% owing to water of crystallization (1H NMR). LC-MS (Method 1): Rt=0.66 min MS (ESpos): m/z=283.0 (M+H)+ 1H NMR (400 MHz, DMSO-d6): delta=2.67 (s, 3H), 3.2-3.8 (very broad water peak), 5.41 (s, 2H), 7.30 (m, 1H), 7.35-7.48 (m, 4H), 7.57 (d, 2H), 9.02 (d, 1H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,96428-50-1, Ethyl 8-(benzyloxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; VAKALOPOULOS, Alexandros; HARTUNG, Ingo; FOLLMANN, Markus; JAUTELAT, Rolf; STRAUB, Alexander; HAssFELD, Jorma; LINDNER, Niels; SCHNEIDER, Dirk; WUNDER, Frank; STASCH, Johannes-Peter; REDLICH, Gorden; LI, Volkhart Min-Jian; BECKER-PELSTER, Eva Maria; KNORR, Andreas; US2014/128386; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 893444-21-8, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 893444-21-8, name is 3-Nitro-6-(trifluoromethyl)pyridin-2-amine. A new synthetic method of this compound is introduced below.

To compound 5.2 (138 mg, <0.67 mmol) in methanol / ethyl acetate (10 mL, 1:1) at room temperature was added palladium on carbon (36 mg, 10%, wet) and the reaction mixture was placed under an atmosphere of hydrogen(balloon). After 1.5 hours, the reaction mixture was filtered through a pad of celite and the filter cake was washed with ethyl acetate and methanol. The solvent was removed under reduced pressure to afford diamine 5.3 (149 mg, >100%) as a yellow film, which was used without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,893444-21-8, its application will become more common.

Reference:
Patent; SUNESIS PHARMACEUTICALS, INC.; WO2006/65703; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 127356-38-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 127356-38-1, name is 2-Methoxy-5-nitropyridin-4-amine, molecular formula is C6H7N3O3, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Aq. conc. HCl (1 ml, 32.9 mmol) was diluted with water. To the solution was added tin (II) chloride (0.448 g, 2.365 mmol), followed by 2-methoxy-5-nitropyridin-4-amine (0.1 g, 0.591 mmol). The mixture was heated to 60 C. for 18 h. The reaction mixture was cooled to room temperature, then basified using 10% NaOH solution. The mixture was extracted with ethyl acetate. The combined organic layers were dried over anhydrous sodium sulfate and concentrated under reduced pressure. The resultant crude compound was triturated with 10% ethyl acetate in Pet-ether to afford 6-methoxypyridine-3,4-diamine (0.06 g, 0.366 mmol, 62.0% yield) as a solid. 1H NMR (400 MHz, DMSO-d6): delta ppm 7.21 (s, 1H), 5.83 (s, 1H), 5.39 (b s, 2H), 4.04 (b s, 2H), 3.62 (s, 3H).

According to the analysis of related databases, 127356-38-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bristol-Myers Squibb Company; Sun, Li-Qiang; Zhao, Qian; Renduchintala, Kishore V.; Sarkunam, Kandhasamy; Nagalakshmi, Pulicharla; Gillis, Eric P.; Scola, Paul Michael; (81 pag.)US9643999; (2017); B2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 89282-03-1, 3-Iodopyridin-4-ol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 89282-03-1, blongs to pyridine-derivatives compound. HPLC of Formula: C5H4INO

Add 1.41 g (0.012 mol) of Zn(CN)2 and 1.15 g (0.001 mol) of Pd(PPh3)4 to a solution of 2.21 g (0.01 mol) of 3-iodopyridin-4-ol in 20 ml of DMF. Heat the reaction mass to 100 and stir at this temperature for 2 h; use the TLC method to ensure the completeness of the reaction. Filtrate the resulting precipitate and wash it with DMF. Concentrate the filtrate under reduced pressure. Purify the resulting product by column chromatography, eluent ethyl acetate : methanol (9:1) Yield: 1.1 g (92%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,89282-03-1, its application will become more common.

Reference:
Patent; JOINT STOCK COMPANY “BIOCAD”; GAVRILOV, Aleksey Sergeevich; ALESHUNIN, Pavel Aleksandrovich; GORBUNOVA, Svetlana Leonidovna; REKHARSKY, Mikhail Vladimirovich; KOZHEMYAKINA, Natalia Vladimirovna; KUKUSHKINA, Anna Aleksandrovna; KUSHAKOVA, Anna Sergeevna; MIKHAYLOV, Leonid Evgen`evich; MOLDAVSKY, Alexander; POPKOVA, Aleksandra Vladimirovna; SILONOV, Sergey Aleksandrovich; SMIRNOVA, Svetlana Sergeevna; IAKOVLEV, Pavel Andreevich; (197 pag.)WO2018/92047; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 3430-22-6, name is 3-Bromo-4-methylpyridine. This compound has unique chemical properties. The synthetic route is as follows. SDS of cas: 3430-22-6

EXAMPLE 5 STR14 3-Bromoisonicotinic acid: 12.9 g (75 mmole) of 3-bromo-4-picoline was added to a purple solution of 23.7 g (0.15 mole) of potassium permanganate in 600 mL of water. This mixture was vigorously stirred 36 hrs. at 45 C. The resulting black solid was filtered and washed with 4*50 mL of hot water. The filtrate was concentrated to ~50 mL. A viscous liquid with black solid resulted. This was filtered through celite, which was washed with 3*20 mL of water. 150 mL of ice cold 2N hydrochloric acid was added. The resulting voluminous white precipitate was filtered and the solid was dried in vacuo to give 3-bromoisonicotinic acid as white powder. 1 H NMR (D6 -DMSO, 400 MHz): delta8.84 (s; H2); 8.63 (d; J=5 Hz; H6); 7.66 (d; J=5 Hz; H5)

With the rapid development of chemical substances, we look forward to future research findings about 3430-22-6.

Reference:
Patent; Merck & Co. Inc.; US5294610; (1994); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 81565-19-7, name is 3-Chloro-4-(trifluoromethyl)pyridine. This compound has unique chemical properties. The synthetic route is as follows. Recommanded Product: 3-Chloro-4-(trifluoromethyl)pyridine

Step A. 3-Chloro-4-(trifluoromethyl)pyridine 1-oxide A mixture of 3-chloro-4-(trifluoromethyl)pyridine (2.00 g, 11.0 mmol) and H2O2 (3.2 mL, 31 mmol) in AcOH (6 mL) was stirred at 80 C. overnight. The reaction mixture was allowed to cool to ambient temperature and quenched with NaHSO3 solution. The mixture was concentrated under reduced pressure and the residue was added saturated NaHCO3 solution (30 mL). The resulting mixture was extracted with DCM (3 times). The combined organic phases were washed with aq. NaHCO3, water and brine, dried over Na2SO4 and concentrated under reduced pressure to give 2.11 g (97% yield) of the sub-title compound as a pink solid. LCMS calc. for C6H4ClF3NO (M+H)+: m/z=198.0. found: 198.0.

With the rapid development of chemical substances, we look forward to future research findings about 81565-19-7.

Reference:
Patent; INCYTE CORPORATION; Li, Yun-Long; Burns, David M.; Feng, Hao; Huang, Taisheng; Mei, Song; Pan, Jun; Vechorkin, Oleg; Ye, Hai-Fen; Zhu, Wenyu; Rafalski, Maria; Wang, Anlai; Xue, Chu-Biao; US2015/57265; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem