Tag: M.W:200-300

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 886364-94-9, name is 5-Bromo-4-methylpicolinaldehyde, molecular formula is C7H6BrNO, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Application In Synthesis of 5-Bromo-4-methylpicolinaldehyde

To a solution of 5-bromo-4-methylpicolinaldehyde (1.044 g, 5.22 mmol) in MeOH (20.0 ml) was added 2.0 M methylamine in MeOH (8.0 ml, 16.00 mmol) followed by sodium cyanoborohydride (1.313 g, 20.89 mmol) and acetic acid (1.00 ml, 17.47 mmol). After stirring at room temperature for 90 mins, the reaction was quenched with HCl (6.0 N in water) (25.0 ml, 150 mmol). The mixture was stirred at room temperature for 30 mins, and treated with NaOH (4 N in water) until pH reached 10. The mixture was extracted with Et2O. The organic layer was dried over anhydrous Na2SO4, filtered and concentrated. The residue was dissolved in CH2Cl2 (30 mL), and treated with Boc-anhydride (1.198 g, 5.49 mmol). After stirring at room temperature for 30 mins, the reaction was concentrated. The residue was purified on silica gel (40 g, 0-100percent EtOAc in hexanes) to give the desired product as a yellow oil (1.101 g, 67percent). LCMS calculated for C13H20BrN2O2 (M+H)+ m/z=315.1; found 315.0.

With the rapid development of chemical substances, we look forward to future research findings about 886364-94-9.

Reference:
Patent; Incyte Corporation; Vechorkin, Oleg; Liu, Kai; Pan, Jun; Sokolsky, Alexander; Ye, Hai Fen; Ye, Qinda; Yao, Wenqing; Hummel, Joshua; (117 pag.)US2018/72741; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 912369-42-7, name is Methyl 3-((tert-butoxycarbonyl)amino)picolinate, molecular formula is C12H16N2O4, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Application In Synthesis of Methyl 3-((tert-butoxycarbonyl)amino)picolinate

ter f-butyl f2-(hvdroxymethyl)py ridin-3-yll carbamate; To methyl 3-[(tert- butoxycarbonyl)amino]pyridine-2-carboxylate and methyl 2-[(tert- butoxycarbonyl)amino]nicotinate (5.00 g, 19.8 mmol) is added THF/MeOH (30 mL/3 mL) and the reaction is cooled to 0 C whereupon sodiumborohydride (1.49 g, 39.6 mmol) is added. The reaction is warmed to rt and stirred for four hours. The reaction mixture is then EPO dissolved in EtOAc and washed with saturated sodium bicarbonate solution. The organic layers are combined, dried over magnesium sulfate, filtered, and concentrated under reduced pressure to afford the title compound and tert-buty [3-(hydroxymethyl)pyridin-2- yljcarbamate which are separated by preparatory HPLC (5-95% MeCN/water/0.1% TFA). The desired isomer is confirmed by ID NOE NMR experiments. 1H NMR delta 8.78 (br s, IH), 8.17 (m, IH), 8.10 (d, IH), 7.27 (dd, IH), 4.64 (s, 2H), 1.46 (s, 9H). LCMS (ES, M+H=225).

With the rapid development of chemical substances, we look forward to future research findings about 912369-42-7.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/106326; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 62674-71-9, name is 2-Iodo-6-methylpyridine, molecular formula is C6H6IN, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Quality Control of 2-Iodo-6-methylpyridine

A mixture of Compound la (55 mg, 0.171 mmol) 2-bromo-6-methylpyridine (23.4 ul, 0.205 mmol), tetrakis(triphenylphosphine)palladium (7.89 mg, 0.007 mmol), sodium acetate (28 mg, 0.342 mmol) and tetrabutylammonium fluoride (44.7 mg, 0.17 1 mmol)) in anhydrous DMF (3 mL) was heated at 110°C into a microwave oven (Biotage Smith Creator®) for 10 mm then cooled at r.t.. The reaction mixture was poured into water and extracted with EtOAc (3x). The organic layer was dried over Na2504 and the solvent was evaporated to dryness to give a crude which was purified via automated flashchromatography (SP1® Biotage, SNAP25 Cartridge), eluting with a EtOAc – PetroleumEther gradient from 75:25 to 1:1 to give mg 51(87.6percent) of the title compound.UPLC-MS [M+H]= 341.521H NMR (400 MHz, DMSO-d6) oe ppm 7.68 (t, 1 H), 7.31 (d, 1 H), 7.22 (d, 1 H), 5.66 (s,1 H), 3.43 (brt, 2 H), 3.15 (s, 2 H), 2.62 (brt, 2 H), 2.45 (s, 3 H), 1.42 (s, 9 H), 1.08 (s, 6H)

With the rapid development of chemical substances, we look forward to future research findings about 62674-71-9.

Reference:
Patent; RECORDATI INDUSTRIA CHIMICA E FARMACEUTICA SPA; RIVA, Carlo; GRAZIANI, Davide; LONGHI, Matteo; CALLEGARI, Elisa; FRIGERIO, Fabio; ANGELICO, Patrizia; (197 pag.)WO2019/2571; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 69422-72-6, name is 2,4,6-Trichloronicotinic acid, molecular formula is C6H2Cl3NO2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Application In Synthesis of 2,4,6-Trichloronicotinic acid

A solution of the product of EXAMPLE 14C (1.5 g, 6.7 mmol) in dichlorom ethane (50 mL) was treated at room temperature with 2 drops of N,N-dimeth lformamide. O alyl chloride (1.27 g, 10 mmol) was added dropwise over 15 minutes and stirring was continued for 2 hours. The solution was concentrated and dried under vacuum to give the crude acid chloride. Ammonium (gas) was passed through a solution of the acid chloride in tetrahydrofuran (20 mL) and the mixture stirred at room temperature for 0.5 hours. The mixture was concentrated under vacuum and the residue purified by flash chromatography on silica gel (200-300 mesh) eluting with 100/1 dichloromethane/methanol to give the title compound. MS: 225 (M+H+).

With the rapid development of chemical substances, we look forward to future research findings about 69422-72-6.

Reference:
Patent; ABBOTT LABORATORIES; VASUDEVAN, Anil; PENNING, Thomas, Dale; CHEN, Huanming; LIANG, Bo; WANG, Shaohui; ZHAO, Zhongqiang; CHAI, Dikun; YANG, Leifu; GAO, Yingxiang; WO2012/97479; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 17570-98-8, Adding some certain compound to certain chemical reactions, such as: 17570-98-8, name is 2-(Bromoacetyl)pyridine hydrobromide,molecular formula is C7H7Br2NO, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17570-98-8.

EXAMPLE 17 2-Pyridin-4-yl-1,5,6,7-tetrahydro-pyrrolo[3,2-c]pyridin-4-one (alternative method) Bromoacetylpyridine hydrobromide (3.3 g, 11.78 mmol), piperidindione (2 g, 17.68 mmol) and ammonium acetate (3.63 g, 47.1 mmol) were dissolved in anhydrous ethanol (54 mL) and stirred at RT overnight. Ethyl acetate (200 mL) was added (precipitate formed) and the mixture was stirred at RT for 30′. The solid was filtered off and discarded, while the solution was concentrated under reduced pressure. The residue (orange-red solid, 4.8 g) was purified by flash chromatography (eluant DCM/MeOH 6:1). To the obtained pink solid (1.34 g, 6.28 mmol), dissolved in MeOH (140 mL), 4N HCl in dioxane (3.14 mL, 12.56 mmol) was added. The mixture (precipitate) was stirred for 30′, then concentrated under reduced pressure to half of the volume, stirred 30′ and filtered to yield the first crop (1.3 g). The mother liquor was concentrated to 20 mL and the second crop filtered out (0.12 g). The two crops were joined and washed twice with 95% EtOH: first with 35 mL and 2 hours stirring, the second with 25 mL of ethanol. The collected solid was dried to yield 1.21 g of desired compound (41.1% yield, purity>90%). By working in an analogous way and starting from the corresponding bromoketoheteroaryl the following compounds were also obtained:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 17570-98-8, 2-(Bromoacetyl)pyridine hydrobromide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Pharmacia Italia S.p.A.; US2007/142414; (2007); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1062368-71-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1062368-71-1, name is Methyl 4-bromopyrazolo[1,5-a]pyridine-3-carboxylate, molecular formula is C9H7BrN2O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

n-Butyllithium (0.251 g, 3.92 mmol, 2.5 M in tetrahydrofuran) and dibutylmagnesium (1.629 g, 11.76 mmol, 1.0 M in heptane) were charged into a nitrogen filled three-necked flask at room temperature. A solution of methyl 4-bromopyrazolo[1,5-a]pyridine-3-carboxylate (2.000 g, 7.84 mmol) in tetrahydrofuran (25 mL) was added dropwise to the lithium tributylmagnesate complex (n-Bu3MgLi) solution at -25 C. and the mixture was stirred at -10 C. for 1 hour. The resulting mixture was added to a solution of sulfuryl dichloride (1.587 mL, 19.60 mmol) in toluene (20 mL) at -10 C. and the mixture was stirred for 20 minutes at -10 C. The organic solvents were removed by rotary evaporation to give a crude solid. Ammonium hydroxide (15 mL, 7.84 mmol) was added to the crude solid at room temperature, and the mixture was stirred for 15 minutes. After completion, the reaction mixture was concentrated to give crude title product. The crude material was purified by silica gel chromatography (25%-40% ethyl acetated in petroleum) to give crude (75% purity) product. The material was then purified by Prep-HPLC on a Gilson 281(PHG013) with Boston pHlex ODS column (21.2*250 mm, 10 m), using a gradient of acetonitrile (B) and 0.05% trifluoroacetic acid in water (A) at 35-55% B in 10 minute with stop at 15 minute, at a flow rate of 25 mL/minute to provide the title compound. 1H NMR (400 MHz, CDCl3) delta ppm 8.70 (dd, J=6.8, 1.0 Hz, 1H), 8.50 (s, 1H), 8.25 (dd, J=7.4, 1.0 Hz, 1H), 7.08 (t, J=7.1 Hz, 1H), 6.60 (s, 2H), 3.96 (s, 3H). MS (ESI+) m/z 256.1 (M+H)+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 1062368-71-1, Methyl 4-bromopyrazolo[1,5-a]pyridine-3-carboxylate.

Reference:
Patent; AbbVie S.a.r.l.; Galapagos NV; Altenbach, Robert J.; Bogdan, Andrew; Desroy, Nicolas; Gfesser, Gregory A.; Greszler, Stephen N.; Kym, Philip R.; Liu, Bo; Malagu, Karine Fabienne; Merayo Merayo, Nuria; Pizzonero, Mathieu Rafael; Searle, Xenia B.; Van der Plas, Steven Emiel; Wang, Xueqing; Yeung, Ming C.; Zhao, Gang; (101 pag.)US2018/244640; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 2897-43-0, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 2897-43-0 as follows.

(C) 2,6-dichloropyridi ne-3,4-diami neTo a solution of 2,6-dichloro-3-nitropyridin-4-amine in ethanol (150 mL) was added iron powder (14.3 g, 0.255 mol), water (46 mL), and then concentrated HCI (28 mL). The reaction mixture was then stirred at 95 C for 16 hours, cooled to roomtemperature, and neutralized. The precipitates were collected by filtration and dried in vacuo. The crude product was then treated with water (200 mL) and extracted with EtOAc (3 x 200 mL). The combined extracts were dried over anhydrous Na2SO4, filtered, and concentrated to afford 7.85 g of the title compound (86.5% yield).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2897-43-0, its application will become more common.

Reference:
Patent; HUTCHISON MEDIPHARMA LIMITED; SU, Wei-Guo; DENG, Wei; JI, Jianguo; WO2012/167733; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 179687-79-7, 2-((2-Chloro-4-nitrophenoxy)methyl)pyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Quality Control of 2-((2-Chloro-4-nitrophenoxy)methyl)pyridine, blongs to pyridine-derivatives compound. Quality Control of 2-((2-Chloro-4-nitrophenoxy)methyl)pyridine

EXAMPLE 2 Preparation of 3-chloro-4-(2-pyridylmethoxy)aniline from the nitrobenzene product of Example 1 was accomplished with catalytic hydrogenation using platinum on carbon. A typical hydrogenation was done using 6 volumes of THF, 2% by weight of 5% Pt/C (50% water wet), at 25 psi and at 25-30 C. for approximately 4-6 hours. The reaction is slightly exothermic and the temperature will rise to about 30-35 C. Cooling is necessary to maintain the temperature below 30 C. As a specific example, a mixture of 3-chloro-4-(2-pyridylmethoxy)nitrobenzene (0.15 kg, 0.57 mole) and 2% (w/w) of 5% Pt/C (6.0 g) in tetrahydrofuran (0.90 L) was hydrogenated at 25 psi for at least 5 hours. The mixture was filtered through a celite pad and washed with tetrahydrofuran (0.60 L). The filtrate was distilled to a volume of about 0.75 L and ethanol (1.12 L) was added. Distillation was continued to a volume of about 0.75 L and ethanol (2.85 L) was added. The mixture may be used “as is” in the step of Example 3 below. Performing the hydrogenation in isopropyl alcohol (IPA), methanol (MeOH), or ethanol (EtOH) may result in the product being contaminated with late eluting impurity that partially precipitates out on standing in solution. It was found that performing the hydrogenation in a solvent where both the product and starting material are soluble, such as tetrahydrofuran (THF), resulted in greater product purity and required much less solvent. Thus, THF is a preferred solvent for this step. Experimental results showing the effect of different reaction conditions are shown in Table 2. For the larger scale runs, the first aniline intermediate was not isolated (?NI?) before proceeding with the next step. TABLE 2 Hydrogenation to Form First Aniline Intermediate 5% Scale (g) Pt/C** Solvent Vol Time (h) Yield (%) 2.0 1 IPA 50 3 79.6 18 2.0 5 EtOH 60 3100* 10 1 THF 10 4 94.5 7 10 1 EtOH 10 3 95.6 30 1.05 THF 6.5 12 96.3 14 100 2 THF 6 4.5 97.1 400 2 THF 6 4 NI 500 2 THF 6 4 NI 100 2 THF 6 5 NI 150 2 THF 6 5 NI 7 *Solid impurities noted after reaction completion. **percent by weight of starting material.

The synthetic route of 179687-79-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; WYETH; US2006/270668; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 17117-13-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 17117-13-4, name is 2-Bromo-4-ethoxypyridine. A new synthetic method of this compound is introduced below.

[00337] Sodium tert-butoxide (210 mg, 2.2 mmol), l-phenylimidazol-4-amine (Hydrochloride salt) (245 mg, 1.3 mmol), and 2-bromo-4-ethoxy-pyridine (126 mg, 0.6 mmol) were weighed into a microwave vial. The mixture was diluted with 1,4- dioxane (5 mL) and degassed with nitrogen for 10 minutes. 0.1 Equivalents of chloro(2-di-t-butylphosphino-2′,4′,6′-tri-i-propyl-l,r-biphenyl) [2-(2- aminoethyl)phenyl]palladium(II) (t-BuXPhos Palladacycle) was added and degassed with nitrogen for another 10 minutes. The vial was sealed and the reaction was heated at 120 C for 30 minutes in a microwave. LC/MS showed the desired product. The crude was purified with double stacked 50 g amine silica columns eluting with 0- 100%(Ethyl Acetate (10%Methanol)) in hexane over 30 minutes. The pure fractions were combined and concentrated to dryness to afford 15.9 mg of desired product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,17117-13-4, 2-Bromo-4-ethoxypyridine, and friends who are interested can also refer to it.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; COLLIER, Philip, N.; DAVIES, Robert, J.; DENINNO, Michael, Paul; DOYLE, Elisabeth; FRANTZ, James, Daniel; GOLDMAN, Brian, Anthony; GRILLOT, Anne-Laure; KOLPAK, Adrienne, Lynne; KRAUSS, Raul, Eduardo; LEDFORD, Brian; LIAO, Yusheng; MAGAVI, Sanjay, Shivayogi; MALTAIS, Francois; PEROLA, Emanuele; RYU, Elizabeth, Jin-Sun; SYKEN, Joshua; TANG, Qing; WANG, Tiansheng; (221 pag.)WO2018/106643; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 13445-16-4 , The common heterocyclic compound, 13445-16-4, name is 3-Bromo-2,6-dimethoxypyridine, molecular formula is C7H8BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step 2: Preparation of (3aR,4R,6S,6aS)-4-(((tert-butyldimethylsilyl)oxy)methyl)-6-(2,6- dimethoxypyridin-3-yl)-2,2-dimethyltetrahydro-3aH-[l,3]dioxolo[4,5-c] (17d) To a stirred solution of 3-bromo-2,6-dimethoxypyridine (17b) (2.73 g, 12.50 mmol) in Tetrahydrofuran (30 mL) was added n-Butyl lithium (1.6 M solution in hexanes, 7.81 mL, 12.50 mmol) at -78 C and stirred at the same temperature for 1 hr. To the anion formed at – 78 C was added a freshly prepared solution of (3aR,4R,6aS)-4-((tert- butyldimethylsilyloxy)methyl)-2,2-dimethyl-4,6a-dihydro-3aH-[l,3]dioxolo[4,5-c]pyrrole (lk) (2.85 g, 10 mmol) in toluene (1.2 molar solution) over a period of 15 minutes. The reaction stirred for 30 minutes at -78 C, quenched with water (50 mL) and extracted with ethyl acetate (3 x 100 mL). The combined organic layers were washed with water (50 mL), brine (50 mL) dried, filtered and concentrated in vacuum. The crude residue was purified by flash column chromatography (silica gel 40 g, eluting with 0-100% ethyl acetate in hexanes) to afford (3aR,4R,6aS)-4-((tert-butyldimethylsilyloxy)methyl)-6-(2,6-dimethoxypyridin-3- yl)-2,2-dimethyltetrahydro-3aH-[l,3]dioxolo[4,5-c]pyrrole (17d) (1.35 g, 31.8 % yield) as a light brown syrup. 1H NMR (300 MHz, DMSO-d6) delta 7.64 (d, J = 8.1 Hz, 1H), 6.29 (d, J = 8.0 Hz, 1H), 4.42 – 4.28 (m, 2H), 4.09 (d, J = 4.3 Hz, 1H), 3.82 (s, 3H), 3.79 (s, 3H), 3.57 (d, J = 5.0 Hz, 2H), 3.05 (d, J = 4.8 Hz, 1H), 2.85 (s, 1H, D20 exchangeable), 1.40 (s, 3H), 1.17 (s, 3H), 0.82 (s, 9H), -0.00 (d, J= 1.3 Hz, 6H). Mass spec (ES+) 425.1 (M+l).

The synthetic route of 13445-16-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BIOCRYST PHARMACEUTICALS, INC.; BABU, Yarlagadda, S.; KOTIAN, Pravin, L.; BANTIA, Shanta; WU, Minwan; KUMAR, V., Satish; WO2014/78778; (2014); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem