Tag: M.W:200-300

Electric Literature of 823221-93-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 823221-93-8, name is 5-Bromo-2-chloro-4-(trifluoromethyl)pyridine, molecular formula is C6H2BrClF3N, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of 5-bromo-2-chloro-4-trifluoromethyl-pyridine (2.54 g, 9.80 mmol) in MeOH (25 mL) was added 25% NaOMe in MeOH (3.2 ml, 14.70 mmol) and heated at reflux for 2 h. The RM was diluted with water and extracted with hexane. The combined organic layers were washed with water and brine, dried and concentrated under reduced pressure to give 5-bromo-2-methoxy-4-trifluoromethyl-pyridine(1.7 g, 68%).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 823221-93-8, 5-Bromo-2-chloro-4-(trifluoromethyl)pyridine.

Reference:
Patent; GRUeNENTHAL GMBH; VOSS, FELIX; NORDHOFF, SONJA; WACHTEN, SEBASTIAN; WELBERS, ANDRE; RITTER, STEFANIE; US2015/166505; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 161117-83-5, tert-Butyl (2-methoxypyridin-3-yl)carbamate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Product Details of 161117-83-5, blongs to pyridine-derivatives compound. Product Details of 161117-83-5

Ketone 2-1 To a -70 C. solution of 1.12 g (5.0 mmol) of 3-(N-tertbutoxycarbonylamino)-2-methoxypyridine (Kelly, Tetrahedron Lett. 35 (48), 1994, 9003-9006) in 25 ML of dry ether was added 1.8 ML (12.0 mmol) TMEDA followed by 4.8 ML (12.0 mmol) of n-BuLi. The resulting solution was warmed to -15 C. where it was aged for 2 h.. The reaction mixture was recooled to -70 C. and treated with 0.83 ML (7.0 mmol) of ethyl trifluoroacetate.. After stirring an additional 3 h, the reaction was quenched with 25 ML of saturated NH4Cl solution and the two phases were separated.. The aqueous phase was extracted with 100 ML of EtOAc and the combined organic extracts were washed with 25 ML of brine and dried over MgSO4.. The yellow solution was concentrated and chromatographed (CH2Cl2) to afford trifluoromethyl ketone 2-1. 1H NMR (CDCl3) delta7.95 (d, J=8 Hz, 1H), 7.10 (bs, 1H), 6.95 (d, J=8Hz, 1H), 4.05 (s, 3H), 1.50 (s, 9H).

The synthetic route of 161117-83-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck & Co., Inc.; US6350745; (2002); B1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 1160791-13-8, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1160791-13-8, name is 2-Amino-6-bromothiazolo[5,4-b]pyridine. This compound has unique chemical properties. The synthetic route is as follows.

To 6-bromothiazoio[5,4-b]pyridin-2-amine (1 .1 g, 4.8 mmol) in acetonitriie (92 mL) was added copper(ll)chloride (964 mg, 7.2 mmol) and the mixture was cooled to OX. Tert- butyl nitrite (739 mg, 7.2 mmol) in acetonitriie (46 mL) was added slowly and the mixture was stirred for 30 minutes at Omicron’ and addit ional 4 hours at room temperature. The mixture was diluted with ethyl acetate, washed with saturated NH4CI-solution, with saturated sodium bicarbonate solution, brine and water. Evaporation yielded 580 mg (47 %) 6-bromo-2-chlorothiazolo[5,4-b]pyridine NMR (300 MHz, DMSO-cfe) delta = 7.87 (d, 1 H), 8.36 (d, 1 H) ppm.

According to the analysis of related databases, 1160791-13-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; ROeHN, Ulrike; SCHMITT-WILLICH, Heribert; HEINRICH, Tobias; BERGER, Markus; FITZNER, Ansgar; KRAUSE, Sabine; BROCKSCHNIEDER, Damian; DYRKS, Thomas; THIELE, Andrea; MOeNNING, Ursula; BOeMER, Ulf; WO2012/7510; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 75806-86-9 ,Some common heterocyclic compound, 75806-86-9, molecular formula is C5H2BrClN2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

5-Chloro-3-nitropicolinonitrile (104) 2-Bromo-5-chloro-3-nitropyridine (103) (6.0 g, 25 mmol) was mixed with copper (I) cyanide (4.6 g, 51 mmol) in a 100 mL round-bottom flask having a condensor loosely plugged with cotton was attached. The flask was slowly heated in an oil bath. When the temperature reaches approximately 150 C. (takes 2 h), the reaction mass begins to turn black. When the reaction mass turned completely black, the pressure was reduced to approximately 1 mm Hg by vacuum and the oil bath removed after 30 sec. (If the reaction goes too long, a vigorous reaction ensues, leaving little recoverable product.) The mixture was cooled to room temperature, and the sublimed solid (on the cotton) and reaction mass were treated with hot acetone (100 mL). The resulting mixture was gravity filtered, and the mother liquor rota-evaporated to dryness to yield the crude title compound as a dark brown solid. This solid can be purified by column chromatography using 4:1 hexane-EtOAc (Rf =0.13).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,75806-86-9, its application will become more common.

Reference:
Patent; State of Oregon, Acting by and Through the Oregon State Board of Higher Education, Acting for and on Behalf of the Oregon Health Sciences University and the University of Oregon; Cocensys, Inc.; US5801183; (1998); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 443956-08-9 ,Some common heterocyclic compound, 443956-08-9, molecular formula is C5H3BrN2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A mixture of 6-bromo-2-nitro-pyridin-3-ol (3 g, 13.7 mmol), Fe (7657.88 mg, 136.99 mmol) and NH4C1 (7329.1 mg, 136.99 mmol) in Ethanol (100 mL) and Water (100 mL) was stirred at 75 C for 2 hours to give a black suspension. The reaction mixture was cooled to room temperature and filtered through Celite. The filtrate was concentrated to give the crude product (2.5 g, 13.22 mmol, 96.55% yield) as a solid. 1H NMR DMSO-c 400MHz deltaH = 9.71 (s, 1H), 6.74 (d, 1H), 6.50 (d, 1H), 5.92 (br s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 443956-08-9, 6-Bromo-2-nitropyridin-3-ol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PRAXIS PRECISION MEDICINES , INC.; REDDY, Kiran; MARTINEZ BOTELLA, Gabriel; GRIFFIN, Andrew, Mark; MARRON, Brian, Edward; (244 pag.)WO2018/148745; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 55849-30-4, name is 5-Bromo-2-ethoxypyridine, the common compound, a new synthetic route is introduced below. Safety of 5-Bromo-2-ethoxypyridine

General procedure: PdCl2(dppf), PdCl2(tbpf) and (A.caPhos)PdCl2. A mixture of the halogenated heterocycle (0.66 mmol) in anhydrous THF (13.2 mL) was degassed by bubbling argon for few minutes. Then, PdCl2(dppf) (27.0 mg, 0.033 mmol, 5.0 mol%), TMEDA (0.130 g, 1.12 mmol, 1.7 equiv) and finally NaBH4 (42.4 mg, 1.12 mmol, 1.7 equiv) were introduced in sequence. The mixture was stirred at room temperature under argon for the proper time and then worked up as described above.

The synthetic route of 55849-30-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chelucci, Giorgio; Figus, Susanna; Journal of Molecular Catalysis A: Chemical; vol. 393; (2014); p. 191 – 209;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 934279-60-4 ,Some common heterocyclic compound, 934279-60-4, molecular formula is C7H3ClF3NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

2-chloro-5-trifluoromethylpyridine carbaldehyde (1.2g, 5.5mmol), obtained in step 1- 1 of Example 1 , was dissolved together with N-ethyl-N-(tetrahydro-2H-pyran-4-yl)-amine (1.3g, 16.5mmol) and K2C03 (3.03g, 22mmol), in toluene (15ml), and refluxed at 130C for 48 hrs with stirring. The reaction mixture cooled to room temperature, and added with water to terminate the reaction, followed by extraction with ethyl acetate. The organic layer was dried over anhydrous magnesium sulfate, filtered, and concentrated. The residue was purified by chromatography to afford the title compound ( .1g, 50%). 1H NMR (400MHz, CDCI3) 8.51 (s, 1 H), 7.88 (s, 1 H), 7.79 (d, J = 2.0Hz, 1 H), 7.77 (s, 2H), 5.72 (d, J = 8.0Hz, 1 H), 4.75 (d, J = 16.0Hz, 1 H), 4.34 (d, J = 16.0Hz, 1 H), 4.00 (m, 2H), 3.46 (m, 6H), 1.86 (m, 4H), 0.93 (t, 3H), 0.63 (d, 3H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 934279-60-4, 2-Chloro-5-(trifluoromethyl)nicotinaldehyde, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; DONG-A ST CO.,LTD; PARK, Jang Hyun; SONG, Seung Hyun; CHUNG, Han Kook; KIM, Heung Jae; LEE, Ji Hye; JANG, Byeong Jun; KIM, Eun Jung; JUNG, Hae Hum; RYU, Chae Lim; HWANG, Jae-Sung; LEE, Hyung Ki; KANG, Kyung Koo; KIM, Soon Hoe; WO2014/157994; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 73112-16-0, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 73112-16-0, name is 2,6-Dibromo-4-methylpyridine. This compound has unique chemical properties. The synthetic route is as follows.

Sodium tert-butoxide (0.15 g, 1.56 mmol) and l,l’-bis(di-tert- butylphsophino)ferrocene palladium dichloride (0.078 g, 0.12 mmol) were added to a mixture of 2,6-dibromo-4-methyl pyridine (0.301 g, 1.2 mmol) and tert-butyl carbamate (0.141 g, 1.2 mmol) in nitrogen sparged toluene (3 mL). The slurry was evacuated and refilled with nitrogen. After stirring at 60 C for 4 hours, the solution was cooled to 25 C, water (1 mL) was added and then the mixture extracted with ethyl actetate (2 x 50 mL), dried ( a2S04), filtered and concentrated in reduced pressure. The residue was chromatographed on silica gel to afford tert- butyl (6-bromo-4-methylpyridin-2-yl)carbamate as a white solid (0.3 g, 1.05 mmol). ‘H NMR (600 MHz, CDC13) delta 7.7 (s, 1H), 7.13 (s, 1H), 6.95 (s, 1H), 2.29 (s, 3H), 1.49 (s, 9H).

According to the analysis of related databases, 73112-16-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MERCK CANADA INC.; ANTHONY, Neville, J.; ANDRESEN, Brian, M.; NORTHRUP, Alan, B.; CHILDERS, Kaleen, K.; DONOFRIO, Anthony; MILLER, Thomas, A.; LIU, Yuan; MACHACEK, Michelle, R.; WOO, Hyun Chong; SPENCER, Kerrie, B.; ELLIS, John Michael; ALTMAN, Michael, D.; ROMEO, Eric, T.; GUAY, Daniel; GRIMM, Jonathan; LEBRUN, Marie-Eve; ROBICHAUD, Joel, S.; WANG, Liping; DUBOIS, Byron; DENG, Qiaolin; WO2014/176210; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 884495-00-5, name is 4-Bromo-5-fluoro-2-methoxypyridine, the common compound, a new synthetic route is introduced below. Recommanded Product: 884495-00-5

A solution of 4-bromo-5-fluoro-2-methoxypyridine (1.0 g, 4.8 mmol) in THF (15 mL) was cooled to -78 C and n-butyllithium (2.2 mL, 5.5 mmol, 2.5 M in THF) was added drop-wise. The resulting mixture was stirred at -78 C for 10 min and a solution of ethyl 4-oxocyclohexanecarboxylate (1.2 g, 7.3 mmol) in THF (5 mL) was added drop-wise with stirring. The resulting solution was stirred for 2 h at -78 C, poured into 100 mL of saturated, aq. H4CI and extracted with ethyl acetate (3 x 100 mL). The separated organic layers were combined, dried over Na2S04 and concentrated. The residue obtained was purified on silica gel with ethyl acetate/petroleum ether (0-20%) to give compound 25a. Mass Spectrum (LCMS, ESI pos.): Calcd. For C15H20FNO4: 298.1 [M+H]+; found: 297.9.

The synthetic route of 884495-00-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; HUANG, Hui; LANTER, James C.; MEEGALLA, Sanath K.; PLAYER, Mark R.; (275 pag.)WO2018/81047; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 867279-13-8, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 867279-13-8, name is 4-Bromo-2-chloro-5-methylpyridine. A new synthetic method of this compound is introduced below.

To a solution of 4-bromo-2-chloro-5-methylpyridine (0.15 g, 0.73 mmol) in DCM (5 ml) was added 77% mCPBA (0.33 g, 1.45 mmol). The resulting mixture was stirred at rt for 3 days. EtOAc was added followed by 1 : 1 mixture of Na2SO3 and Na2CO3 solutions. The resulting mixture was stirred vigorously for 0.5 hour and the organic phase was separated. The aqueous phase was extracted with EtOAc. The combined organic phases were washed with aq. ‘Na2C03 solution and brine, dried with Na2S04, filtered and evaporated yielding 0.13 g of 4-bromo-2-chloro-5-methylpyridine 1 -oxide. 1H NMR (CDCi3) delta: 8.20-8.23 (m, 1 1 1), 7.66 (s, 1-Iota), 2.31-2.34 (m, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,867279-13-8, 4-Bromo-2-chloro-5-methylpyridine, and friends who are interested can also refer to it.

Reference:
Patent; RICHTER GEDEON NYRT.; ORION CORPORATION; HAIKARAINEN, Anssi; JOUBERT, Muriel; KAROLYI, Benedek; KAeSNAeNEN, Heikki; PASSINIEMI, Mikko; POHJAKALLIO, Antti; SZANTO, Gabor; VAISMAA, Matti; (97 pag.)WO2019/43635; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem